ddanko8148 1 #1 Posted July 6, 2021 I have a C-175 that I have had for a couple of months going thru things one at a time Well the belt for the deck went bye bye looked it up and I am supposed to need a 107 inch belt Well it is way too long any thoughts besides it needs to be shorter lol Thanks Dale deck number 48MS02 Share this post Link to post Share on other sites
Jeff-C175 7,199 #2 Posted July 6, 2021 (edited) Spindle belt or drive belt? My deck takes a Toro 1594 for the spindles, whatever that crosses to. Quote 1594 - REPLACEMENT TORO/WHEEL HORSE BELT 1/2 X 107.25" Perhaps you've got it routed incorrectly? Drive belt is a 102742 and that one is shorter than the spindle belt: Quote 102742 - REPLACEMENT TORO/WHEEL HORSE BELT 1/2" X 103" Edited July 6, 2021 by Jeff-C175 Share this post Link to post Share on other sites
ddanko8148 1 #3 Posted July 6, 2021 The spindle belt which connects to all 3 blades Share this post Link to post Share on other sites
Jeff-C175 7,199 #4 Posted July 6, 2021 1 minute ago, ddanko8148 said: The spindle belt which connects to all 3 blades The 107 should be fine. Check the belt routing... 1 Share this post Link to post Share on other sites
ddanko8148 1 #5 Posted July 6, 2021 You were right Jeff Thanks so much I'll be back Dale 1 Share this post Link to post Share on other sites
Jeff-C175 7,199 #6 Posted July 6, 2021 25 minutes ago, ddanko8148 said: I'll be back Dale We'll be here! And, by the way, WELCOME TO RS! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #7 Posted July 6, 2021 Will guess this is your deck. Not many 48" models end in 02 Click on the fuzzy picture in the link. Share this post Link to post Share on other sites
