Jeff1129 108 #1 Posted July 3, 2021 Hi im jeff im new to the forum i own a 520hc as of 4 days ago im hopefully going to restore it I'd like to get to know everyone and get to know my 520 tell me what to be worried about Thanks,jeff 4 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,045 #2 Posted July 3, 2021 Welcome to Red Square. 2 pages of reading https://www.wheelhorseforum.com/search/?&q=520-hc&type=downloads_file&search_and_or=or&sortby=relevancy Garry 2 Share this post Link to post Share on other sites
rjg854 11,362 #3 Posted July 3, 2021 the biggest thing to worry about is finding a place to put them all, one is never enough 1 1 1 6 Share this post Link to post Share on other sites
BOB ELLISON 2,981 #7 Posted July 4, 2021 Hi Jeff welcome to redsquare You came to the right place for information. And another Michigander I hope. Great bunch of guys here wanting to help you get your horse running like new. 1 1 Share this post Link to post Share on other sites
Jeff-C175 7,202 #9 Posted July 4, 2021 6 hours ago, Jeff1129 said: im jeff Me too! Welcome! 1 Share this post Link to post Share on other sites
Pullstart 62,887 #10 Posted July 4, 2021 12 hours ago, rjg854 said: the biggest thing to worry about is finding a place to put them all, one is never enough You can put them in your truck if you need to! 5 Share this post Link to post Share on other sites
Jeff1129 108 #11 Posted July 4, 2021 10 hours ago, BOB ELLISON said: Hi Jeff welcome to redsquare You came to the right place for information. And another Michigander I hope. Great bunch of guys here wanting to help you get your horse running like new. Im a Michigander 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #12 Posted July 4, 2021 to the best place surrounding Wheelhorses 1 Share this post Link to post Share on other sites
jay bee 897 #13 Posted July 4, 2021 @Jeff1129 to from the other side of the state!!! 1 Share this post Link to post Share on other sites
19richie66 17,508 #14 Posted July 4, 2021 8 hours ago, pullstart said: And it broke so you got rid of it 4 Share this post Link to post Share on other sites
Digger 66 3,478 #15 Posted July 4, 2021 Hey Jeff . 1 Share this post Link to post Share on other sites
Bill Winn 156 #16 Posted July 4, 2021 Hey a fellow newbie! Welcome. This place is an amazing resource and the folks here are cordial and helpful. Bill 4 Share this post Link to post Share on other sites
953 nut 55,240 #17 Posted July 4, 2021 The electrical wiring has a "nine pin connector" that tends to be a problem, check all of your wiring for signs of corrosion. 4 Share this post Link to post Share on other sites
Horse Newbie 7,069 #18 Posted July 5, 2021 (edited) @Jeff1129 Like @953 nut said...check all of your wiring... While you're at it, clean all connections( spade ends, brass nuts, etc. ), and apply dielectric grease to help prevent future corrosion- just to get started. WE LOVE PICS !!!!!!!!!!!!!!! When you start getting into the restoration, check here often for advice and ideas and you'll get it right the first time. These guys know what filters, fluids, etc. is best for your machine ! I got my first Wheel Horse 4-5 years ago. It is a 1994 520H. I love it ! I let it sit(inside) for a few years after I got it, and last Aug.- Sept really started digging into it and ended up doing what I call a "refresh"... not a total restoration. I had a ball ! May I suggest you become a supporter on Red Square. ( That will turn your username red and allow you to post pics ). I don't know if you have to be a supporter to join the 520H club on here, but I would suggest that too. I recently acquired a 1984 Work Horse GT-1600 Wheel Horse- to grow the herd. It has a twin Briggs, and a manual transmission. I can't wait to dig into it also ! Here are some before and after pics of my 520H to maybe give you a little motivation... Edited July 5, 2021 by Horse Newbie 2 3 Share this post Link to post Share on other sites
OldWorkHorse 3,045 #19 Posted July 5, 2021 Hello Jeff! My names Steve nice to meet you I own a 314-8, and ! 3 Share this post Link to post Share on other sites
Jeff1129 108 #20 Posted July 5, 2021 This is the 520hc 4 1 Share this post Link to post Share on other sites
Horse Newbie 7,069 #21 Posted July 5, 2021 1 hour ago, Jeff1129 said: This is the 520hc Looks to be in pretty good shape...how does it run ? According to your personal preference, you may be able to buff the paint on parts of it, and maybe just paint the running boards and belt covers, etc. Then like has partially been mentioned- check over the tractor and look for any items that need to be addressed. I would take the tins off the engine and make sure the cooling fins are not clogged with oil, dust/ dirt, and grass clippings. 1 Share this post Link to post Share on other sites
Jeff1129 108 #22 Posted July 5, 2021 6 minutes ago, Horse Newbie said: Looks to be in pretty good shape...how does it run ? According to your personal preference, you may be able to buff the paint on parts of it, and maybe just paint the running boards and belt covers, etc. Then like has partially been mentioned- check over the tractor and look for any items that need to be addressed. I would take the tins off the engine and make sure the cooling fins are not clogged with oil, dust/ dirt, and grass clippings. I need some carb work and some electrical work the tractor is getting no power just needs key switch ive had this problem 1 Share this post Link to post Share on other sites
Horse Newbie 7,069 #23 Posted July 5, 2021 If the engine is surging, the first thing I would try is a good carb cleaning. I have heard guys on here suggest starting by first taking the top off the carb and clean... Others say take carb off, disassemble, soak, reassemble...may not need a rebuild kit. Also clean the entire fuel system would probably be a good move. 1 Share this post Link to post Share on other sites
