Marc1 23 #1 Posted July 3, 2021 Hi, I'm Marc and am from Luxembourg I have a 520H (Model 73520 / serial 5900115) and a 312-8 (Model 73380 / serial 3900132). I also had a european build B111, bought in Belgium back then, but unfortunately sold it a few years ago I think that I'm going to buy another Wheel Horse to complete my collection just as for some accessories like a plow, a tiller, a snow-plow and some tools to start gardening, but they are hard to find over here in Europe. If anyone knows where to get some tools over here, let me know. Have a nice day to all Marc www.marckieffer.com 5 10 Share this post Link to post Share on other sites
stevasaurus 22,739 #2 Posted July 3, 2021 Welcome to Red square. You might want to get in touch with @Skipper...he comes over here to ship Wheel Horse equipment back over to...I think he lives in Denmark. Nice pictures !! Don't tell me, she threw that last bale of hay up on that wagon. 2 2 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,297 #3 Posted July 3, 2021 Welcome to Red Square . 1 Share this post Link to post Share on other sites
rjg854 11,361 #4 Posted July 3, 2021 good hunting looking for attachments 1 Share this post Link to post Share on other sites
Pullstart 62,878 #5 Posted July 3, 2021 nice to see them Horses farming! 1 Share this post Link to post Share on other sites
Marc1 23 #9 Posted July 4, 2021 14 hours ago, stevasaurus said: Welcome to Red square. You might want to get in touch with @Skipper...he comes over here to ship Wheel Horse equipment back over to...I think he lives in Denmark. Nice pictures !! Don't tell me, she threw that last bale of hay up on that wagon. Well, I gave her a hand with the hay 😂 4 Share this post Link to post Share on other sites
Tractorhead 9,064 #10 Posted July 4, 2021 With little Skills in Welding and Machining, you can rework a lot of older used Attachements for a Wheelhorse or any other Machine. Some examples? here we go. an old handpush Tiller after little rework It becomes a Wheelhorse Attachement. Or i. Eg an selfmade FEL - yes even made of Aluminum can be done and with a selfmade Shovel you be good to go. also be great for Winter Service two simple rakes and you can degrassed a piece of Field. an old collapsed Pavillion becomes a leightweight Trailer all that is made from old reused Things. this Plow i.eg. Was from a Agri 2 Wheeler. Reworked with a mount and Here we go. Real Wheelhorse Attachements are here hard to get, except the Sailor can organize you a costeffective Transport. Most things can be made at home, with a little knowledge of Steel, but the Base Wheelhorse is a fantastic Machine, because they be greatly dimensioned as basements for such small Development machinery. They be useful, quick Attached and very handsome for quick done Jobs. i also have an iseki, a Brutforce Small Tractor, but i preferr the Wheelhorses, because they be quicker in Attachements. The Iseki (my Beast) needs a little more workarround to be prepared. but also here Attachements can be done like a Pipe and an old 3Point mount becomes a Plowmount Things can be made easy for maximum benefit. so to have them useful also i.eg as a Rearfork. all the things can a so be homemade, it just depends on skills and timeframe you needed it. While i purchased the Iseki before o got my Wheelhorse i also make some Attachements for her. a complete homemade FEL in Steel Or even a Backhoe an idea few parts and.. Things can be made, but even if i get my Wheelhorse 656 after the Iseki, it is still my beloved Machine no doubt. There are nearly no limits.in Attachements, depending if the Machine shall be in original condition or if it can be a little reworked to be close to Original condition. An old sicklebar Pushmower turns into a Hedgemower, what works fantastic. Actually mine was a little modified but be close to original as possible. My Wheelhorse is a fantastic Worker, used allmost daily. with few U- profile Steelpipes i rebuilt a Plowframe, because i can not find here one for a reasonable price. i still have the Original Tecumseh Engine but the complete Engine rebuild kit cost double the price of the Predator here. So i give her a Predator Swap. Left is the Predator with a selfmade Stack, the Right pict is the Original Teccy Engine with a Chomestack. The Plowframe i built can be used twice, once as Snowplow, once as Broom after Hedgemowing. so have Fun and use your Wheelhorse for what you need it. 7 2 Share this post Link to post Share on other sites
Marc1 23 #11 Posted July 4, 2021 @Tractorhead This is absolutely crazy !!! Best greetings (beste grüsse in german) 1 Share this post Link to post Share on other sites
Skipper 1,788 #12 Posted July 5, 2021 I can most likely help you out with what ever you need. Also have a few horses ready for new owners at the moment. Lets continue on e-mail or PM 3 1 Share this post Link to post Share on other sites
Maxwell-8 4,275 #14 Posted July 6, 2021 On 7/3/2021 at 7:36 PM, Marc1 said: Hi, I'm Marc and am from Luxembourg I have a 520H (Model 73520 / serial 5900115) and a 312-8 (Model 73380 / serial 3900132). Welcome, 520 are pretty rare in europe. and your looks very clean! Greetings from belgium! Share this post Link to post Share on other sites
Marc1 23 #15 Posted July 6, 2021 39 minutes ago, Maxwell-8 said: Welcome, 520 are pretty rare in europe. and your looks very clean! Greetings from belgium! So you're from Hasselt? Hasselt is quite nice and I once ate something at the groene Hendrickx (with a brugse zot beer I think to remember). Well yes, I take care about my stuff 1 Share this post Link to post Share on other sites
Maxwell-8 4,275 #17 Posted January 9, 2022 On 7/4/2021 at 3:08 PM, Tractorhead said: Have been planning on doing the same thing since, I only know of one WH tiller in Belgium, and if there would ever be one for sale, It would be $1000 for sure. Just a small concern. Is it a problem the tiller is narrower then the tractor? Ich habe geplant, dasselbe zu tun, da ich nur eine WH-Pinne in Belgien kenne, und wenn es jemals eine zu verkaufen gäbe, würde sie sicher $1000 kosten. Nur eine kleine Sorge. Ist es ein Problem, dass die Pinne schmaler ist als der Traktor? Share this post Link to post Share on other sites
