nylyon-(Admin) 7,275 #1 Posted June 24, 2021 For those going, have an awesome time! Please remember to post your pictures in the 2021 WHCC Show area. If you are taking video's please try to host those on a service like YouTube, Video's consume A LOT of resources and YouTube does a MUCH better job at serving a seamless experience than this forum does. 9 1 Share this post Link to post Share on other sites
Ed Kennell 38,175 #2 Posted June 24, 2021 When I pulled in, the entrance was jammed waiting for the 9AM opening. Then I saw Jay and Howard and I knew it was going to be a great day. So thankful to see all the guys especially these two. 1 2 2 3 Share this post Link to post Share on other sites
Pullstart 62,879 #3 Posted June 25, 2021 It’s so nice to see so many friends and meet so many new ones too! No pics if you can believe it, we spent the whole day to take just one lap around the show grounds... chit chatting, setting up, installing a FEL with @Wheel Horse 3D, and getting stuff running. I spent a couple hours with Wild Bill tonight, talking and telling stories of years past. @Tractorhead he’ll be ready for you during the parade some day, we miss you buddy! 5 2 Share this post Link to post Share on other sites
Tractorhead 9,064 #4 Posted June 25, 2021 Get my first shot next week, too late for this year‘s Big Show. Additionally the Heart Attack of mrs. Tractorhead was another heavy reason, i must quit my Travel plans this year. But the next year‘s Visit is still in Schedule. Wanna also see all ya Lads all face to face. 3 4 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #5 Posted June 25, 2021 (edited) Oh yeah, Showtime!(on a seperate note, "Showtime!!!!" Was the motto of one of my military platoons.) Light setup Thurs for a few hours, going full setup with printer today. Kevin got me all lined out and edjumacated on the FEL and got it all installed on Dug! VERY pleased with it, and even the patina matches really well with Dug.thans @pullstart!!!!! Edited June 25, 2021 by Wheel Horse 3D 6 5 1 Share this post Link to post Share on other sites
Jeff-C175 7,202 #6 Posted June 25, 2021 OK, now which one of you guys TP'd Grey's seat? 1 6 Share this post Link to post Share on other sites
Thor27 767 #7 Posted June 26, 2021 16 hours ago, Wheel Horse 3D said: Oh yeah, Showtime!(on a seperate note, "Showtime!!!!" Was the motto of one of my military platoons.) Light setup Thurs for a few hours, going full setup with printer today. Kevin got me all lined out and edjumacated on the FEL and got it all installed on Dug! VERY pleased with it, and even the patina matches really well with Dug.thans @pullstart!!!!! Nice loader! I like how that frame goes to the front, most I see, and mine stop at the mid tachmatic. 1 1 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #8 Posted June 26, 2021 On 6/25/2021 at 8:20 AM, Jeff-C175 said: OK, now which one of you guys TP'd Grey's seat? I tried some flex seal to seal the splits in the cover, and the areas I applied thick did fine, but the lightly coated areas are sticky! Didnt cure right! 3 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #9 Posted June 27, 2021 I wish I had been out and about more for more pics! But i did manage to catch @Achto and the excellent finishes on his ornaments, and saw @BHunter and his sparkling hood and his ornament. Had a GREAT time visting with everyone who stopped by. Got some nice new wide rears for Dug(gonna need some spacers and a seat pan lift!) And of course @pullstart and family were a joy! And special thanks to @roadapples for taking blame for the micro TLB project! Mrs had a great time visiting and roaming and is ready to go get herself an RJ! 2 8 Share this post Link to post Share on other sites
Wheel Horse 3D 3,795 #10 Posted June 27, 2021 (edited) 22 hours ago, Thor27 said: Nice loader! I like how that frame goes to the front, most I see, and mine stop at the mid tachmatic. That front portion and the angle supports that attach to it, transmit a lot of loads applied toward the top of the uprights back to the subframe and thus against the tractor frame and axle and not to the weak area near the base of the uprights where the center tachmmatic and transmission mounts are. Basically the tractor is double framed with the subframe carrying the majority of the loads applied to the loader. Edited June 27, 2021 by Wheel Horse 3D 2 Share this post Link to post Share on other sites
Wheelhorse#1 1,657 #11 Posted June 27, 2021 (edited) Friday ,My first time going and it was great.Next yr I’ll bring my ride and wagon. I was impressed with the amount of parts available there. I found a couple pulleys and a two rear AG tires .Man ,they are a bear to get on ! Even worst was getting the original WH tires off. looking forward to next yr ! Edited June 27, 2021 by Wheelhorse#1 2 4 Share this post Link to post Share on other sites
Lane Ranger 10,968 #12 Posted June 27, 2021 Lots of pictures pictures from three days of Wheel Horse fun and friendship! Thanks to all who extend their support for Wheel Horse and the people of the Wheel Horse Collector’s Club and the Red Square Wheel Horse Forum. 2021 was a great show! 3 11 1 4 Share this post Link to post Share on other sites
Wheelhorse#1 1,657 #13 Posted June 27, 2021 (edited) Nice job on the pics.Had a great time.Wish I’d taken more pictures But there was so much to check out Edited June 27, 2021 by Wheelhorse#1 1 Share this post Link to post Share on other sites
Lane Ranger 10,968 #14 Posted June 28, 2021 Some good Nikon photos of the Big Show First Day Registration Lineup ! Trailer loads of nice Wheel Horse Tractors ! And parts and tractors for sale galore! 2 5 1 Share this post Link to post Share on other sites
Lane Ranger 10,968 #15 Posted June 29, 2021 (edited) Back Home in Indiana all safe and sound. 1250 miles to and from Gettysburg. I posted pics of the 2021 D Series T shirt I bought. Also thanks to Jim WX24 and Dan ACHTO for the Peanut Butter surprise party! Love ❤️ the Wheel Horse rug to Jim! Edited June 30, 2021 by Lane Ranger 7 2 1 Share this post Link to post Share on other sites
