Mjhinno 15 #1 Posted June 14, 2021 Any words of wisdom to get a right side spindle pulley off? Tried heat and even tried to tap the 2 holes in the pulley to jack the pulley up. No dice. Once the nut is off the top and the blade is removed from the bottom, can I get the spindle shaft out the top with the pulley still on it so I can go to the arbor press? Or, will the shaft press out downward through the pulley? Thanks as always! Share this post Link to post Share on other sites
Mjhinno 15 #2 Posted June 14, 2021 OMG! Put the deck up on the forklift, put a aluminum block on top of the spindle, and few light taps and it dropped right out. Feel like I hit the lottery. Was sure it would be my nightmare 2 Share this post Link to post Share on other sites
pacer 3,168 #3 Posted June 14, 2021 You might orta go buy a lottery ticket! Thats great, and I thought I heard a great big SIGH a bit ago...... Those dang things can be a real booger.... 1 Share this post Link to post Share on other sites
Jeff-C175 7,199 #4 Posted June 14, 2021 (edited) 3 hours ago, Mjhinno said: spindle pulley Quote press fit pulley Quote a real booger But they're not 'press fit', they just get 'stuck'. So it's really a 'Stuck Booger Fit'. Edited June 14, 2021 by Jeff-C175 4 Share this post Link to post Share on other sites
Mjhinno 15 #5 Posted June 15, 2021 15 hours ago, pacer said: You might orta go buy a lottery ticket! Thats great, and I thought I heard a great big SIGH a bit ago...... Those dang things can be a real booger.... Might just do that, and yes you did hear me. Funny the kind of sh*t that'll make a mechanic happy Share this post Link to post Share on other sites
