Mjhinno 15 #1 Posted June 14, 2021 I purchased a really great condition powered bagger set-up from a forum member this weekend, It's made for "C" series and I have a 520H (412O0E01 9235) with a 48" deck. I've managed to adapt the blower without too much drama and am now looking for the correct bag frame stand-off arms (please see attached #5 and #6) I had to modify the left side bar to fit past the hydro filter bracket but as they are now the bagger does not seat evenly in the stand-off arms and it is too close to the rear of the seat. The seat back and bagger top interfere when my weight compresses the seat springs. Hopefully someone here can supply or tell me where I can obtain the proper stand offs. Barring that I'm sure I can fab something, but OE would be my first choice. If someone here has this set up on a 512H and can snap a few photos withe a measurement scale present I'd be very grateful. Thanks much in advance bagger support.pdf Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #2 Posted June 14, 2021 115130 and 115131 still show as available from Toro. Garry Share this post Link to post Share on other sites
Mjhinno 15 #3 Posted June 14, 2021 58 minutes ago, gwest_ca said: 115130 and 115131 still show as available from Toro. Garry Thanks Garry. I think those parts numbers will just net me the same brackets I have now, made for "C" series. I'm trying to find the proper brackets to use on a 520H Share this post Link to post Share on other sites
clueless 2,976 #4 Posted June 14, 2021 8 minutes ago, Mjhinno said: Thanks Garry. I think those parts numbers will just net me the same brackets I have now, made for "C" series. I'm trying to find the proper brackets to use on a 520H Those number are for the newer WH horse bagger 300,400, and 500 series not the C series. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #5 Posted June 14, 2021 This one is listed for the 1992 520-H and left and right are different https://www.partstree.com/models/07-4xvc01-toro-42-48-vacuum-bagger-sn-020000001-029999999-1992/ Garry Same part numbers as above The 07-4XVC01 part number changed to 79301 for 1993-2012 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,033 #6 Posted June 14, 2021 1 Share this post Link to post Share on other sites
Mjhinno 15 #7 Posted June 14, 2021 You folks are a fantastic and invaluable resource. Thanks so very much for your guidance! 1 Share this post Link to post Share on other sites
