WHwest8597 85 #1 Posted June 10, 2021 Looking for a frame reinforcement plate for a 314-8 or the dimensions to make one. Share this post Link to post Share on other sites
Lee1977 6,666 #2 Posted June 10, 2021 I didn't put a full plate on mine but I could draw one up if no one can come up with one. I'll have to check a few dimations to add to the one I have. I used two 1/4" x 1 1/2" top and bottom as my transmission plate was not broken. I'll have to take a picture of the drawing and post it here I have around 95% of what's needed on my drawing for a full plate. Here is a picture of my tractor. 3 3 Share this post Link to post Share on other sites
squonk 41,155 #3 Posted June 10, 2021 @daveoman1966 1 Share this post Link to post Share on other sites
Lee1977 6,666 #4 Posted June 11, 2021 Here you go! 4 2 Share this post Link to post Share on other sites
WHwest8597 85 #5 Posted June 11, 2021 3 minutes ago, Lee1977 said: Here you go! How thick is the plate? Share this post Link to post Share on other sites
Lee1977 6,666 #6 Posted June 11, 2021 You can use what ever thickness you like. !/4" or 5/16" is all you need. There are ridges on the 314 plate. I would place two 1/8" flat steel behind the plate at the mounting holes. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,046 #7 Posted June 11, 2021 Will guess the 13/16" holes should be 13/32" holes. Garry Share this post Link to post Share on other sites
Lee1977 6,666 #8 Posted June 11, 2021 1 hour ago, gwest_ca said: Will guess the 13/16" holes should be 13/32" holes. Garry Yes. I was doing that fast. 1 Share this post Link to post Share on other sites
Maxwell-8 4,277 #9 Posted June 11, 2021 When should you make a reinforcement plate? Does the trans support bend/break? Share this post Link to post Share on other sites
WheelhorseBob 1,549 #10 Posted June 11, 2021 I asked this question a while back and got a bunch of great responses. 1 1 Share this post Link to post Share on other sites
peter lena 8,634 #11 Posted June 11, 2021 @Lee1977,agree with you on those reinforcements , especially if you regularly are pushing / pulling or maxing out your horse. like the FEL SETUP . also a regular look see on your chassis , for " working rusty areas " are a sign of twisting / bending . stay after it . pete Share this post Link to post Share on other sites
Lee1977 6,666 #12 Posted June 11, 2021 1 hour ago, Maxwell-8 said: When should you make a reinforcement plate? Does the trans support bend/break? They can crack around the transmission bolts when using ground engaging implements. Hitting things that don't move is my guess. Some have cracked completely if not found and fixed. 1 1 Share this post Link to post Share on other sites
