Where to find 6449 seal original size ?

[Chris1055 106]

I’m trying to hunt down the 6449 seal for a hydro gear. I found the Napa 11124 but it’s is 1/4 width where I need a 1/2 will the 1/4 inch work or where can I find the 1/2 through skf 

thanks 

[Maxwell-8 4,275]

4 hours ago, Chris1055 said:

I’m trying to hunt down the 6449 seal for a hydro gear. I found the Napa 11124 but it’s is 1/4 width where I need a 1/2 will the 1/4 inch work or where can I find the 1/2 through skf 

thanks 

I need two as well. I am gone order them at the Toro dealer. No to expensive here that way.

[ebinmaine 67,498]

5 hours ago, Chris1055 said:

I’m trying to hunt down the 6449 seal for a hydro gear. I found the Napa 11124 but it’s is 1/4 width where I need a 1/2 will the 1/4 inch work or where can I find the 1/2 through skf 

thanks 

A site search on the 6449 shows it crosses to the 11124 and is the correct Axle seal for the 1-1/8" axle hydro transmission. 

Width shouldn't be an issue. 

 

[gwest_ca-(File Mod) 11,045]

SKF 11124 is in the middle. Other seal types and widths they have. CRWA1 is the type/style of seal. Letter at the end identifies the lip type - R=Nitrile.

One advantage of using different width seals is it allows you to install in a different location on the shaft if the shaft is worn or damaged by rust.

1.125	1.624	1.628	0.25	11123**	CRW1	R
1.125	1.624	1.628	0.25	11111*	CRW1	P
1.125	1.624	1.628	0.25	11130**	HM21	R
1.125	1.624	1.628	0.256	11134*	CRWA1	V
1.125	1.624	1.628	0.256	11133*	CRW1	V
1.125	1.624	1.628	0.256	11124*	CRWA1	R
1.125	1.624	1.628	0.256	562487*	CRWA1	H
1.125	1.624	1.628	0.256	547585*	CRWA1	H
1.125	1.624	1.628	0.256	547488*	CRWA1	D
1.125	1.625	1.628	0.315	542621**	CRWHA	R

[953 nut 55,229]

You can get the real thing on  for$ 9.34 a pair shipped free.

https://www.ebay.com/itm/142042768245

[Chris1055 106]

Thanks didn’t even think to check eBay