The Tuul Crib 7,336 #1 Posted May 29, 2021 So I started putting this 42 inch deck back together and things are going good now that I found the hubs and spindles. just. sitting and watching the paint dry! 6 4 Share this post Link to post Share on other sites
The Tuul Crib 7,336 #3 Posted May 29, 2021 Had time to take apart the hubs and discovered the guy l had chase the threads on the shaft chased em a little crooked. Oopps! The 1/2 inch shaft was worn out! Alot!! The shaft for the deck rollers that is!Went TSC and set me back a whopping 18 bucks. So about 60 bucks into it.!! I havent found any pulleys around here yet! I know nothing about this deck on what bearings seals or belts etc it needs. Share this post Link to post Share on other sites
The Tuul Crib 7,336 #4 Posted June 7, 2021 (edited) Ok so im painting some more parts. lm trying to figure what seals l need for these hubs. The inside needs to be .075 and the outside needs to be 1.575. Any idea part #? Edited June 7, 2021 by The Tuul Crib Share this post Link to post Share on other sites
