Shawn P 37 #26 Posted May 28, 2021 On 5/25/2021 at 10:07 PM, oliver2-44 said: @gwest_ca can resister your serial numbers. Post a picture of the tractors and the serial numbers for his records. For decals go to the Vendor Section and Reproduction Graphics will fix you up. Terry @Vinylguy on here, he is the best! If you don't find a carb bowl on Flebay, you can plug that with JBWeld, it will hold! Hoping this will do @gwest_ca Share this post Link to post Share on other sites
rmaynard 15,514 #27 Posted August 26, 2022 On 5/18/2021 at 8:28 PM, wheelhorseman said: If anybody needs a 701 Dash I have some extra Lowell, I do. The one I got from Glen about 4 years ago has cracked, twisted and is not really usable any longer. I have had it sitting on the bench and when I picked it up today after gluing as Glen recommended, it was basically a pretzel. Are the ones that you have made of any different plastic? Something a little harder and not easily affected by heat. PM me Share this post Link to post Share on other sites
wheelhorseman 3,211 #28 Posted August 29, 2022 On 8/26/2022 at 3:32 PM, rmaynard said: Lowell, I do. The one I got from Glen about 4 years ago has cracked, twisted and is not really usable any longer. I have had it sitting on the bench and when I picked it up today after gluing as Glen recommended, it was basically a pretzel. Are the ones that you have made of any different plastic? Something a little harder and not easily affected by heat. PM me Yes mine are made from a different material they are harder and don’t warp when out in the sun. 2 Share this post Link to post Share on other sites
rmaynard 15,514 #29 Posted August 29, 2022 7 minutes ago, wheelhorseman said: Yes mine are made from a different material they are harder and don’t warp when out in the sun. PM sent Share this post Link to post Share on other sites
