Just wanted to say Hi.

[Scott s 19]

I just wanted to say hi and thank the forum for all the great information on the wheel horses. I picked up a 314h with side discharge deck and single stage snow blower.

[ronwh 186]

  to Red Square,  nice looking tractor and tall chute snow blower. 

[kpinnc 12,088]

Nice solid machine that should last another 30-40 years!

[Maxwell-8 4,277]

on  looks like a good solid working machine!  You will have years of fun with it!

[Ed Kennell 38,226]

 to the  Scott.      

 

The 314H looks great and is a great tractor.        The 321M Kohler engine and the Eaton 1100 transmission with the hydraulic lift wil make a good mower and snow machine.  You will appreciate the hydraulic lift when using the snow blower.

 

One note, the blower side extensions are on backwards.   They should be flipped over or changed from side to side so the leading edge is parralel to the side of the blower housing.   Then they will cut into the snow and not push the blower sideways.

[SylvanLakeWH 25,600]

[Achto 27,603]

[Pullstart 62,911]

Scott!  What are your plans with all the golf carts?  Nice machine, it looks very well kept!

[Tractorhead 9,064]

 to 

 

 

[AMC RULES 37,130]

👋 Hi there!

[roadapples 6,983]

@pullstart  Need more toys Kev..

Edited May 6, 2021 by roadapples

[seuadr 488]

well, hi!

 

[WHX?? 48,828]

Ditto what Ed said about the blower wings  and if you need the hoobie doos to put the chute back on a member here has them. They often break. 

[Scott s 19]

1 hour ago, pullstart said:

Scott!  What are your plans with all the golf carts?  Nice machine, it looks very well kept!

I picked the tractor up from my work where it was auctioned off on gov deals the golf carts will be auctioned off also but have not been put on there yet. I’m not sure when they are going to auction them off though.

 

3 hours ago, Ed Kennell said:

 to the  Scott.      

 

The 314H looks great and is a great tractor.        The 321M Kohler engine and the Eaton 1100 transmission with the hydraulic lift wil make a good mower and snow machine.  You will appreciate the hydraulic lift when using the snow blower.

 

One note, the blower side extensions are on backwards.   They should be flipped over or changed from side to side so the leading edge is parralel to the side of the blower housing.   Then they will cut into the snow and not push the blower sideways.

Thank you so much I will swap them around when I put the chute and everything else onto the blower.

[Stormin 9,981]

 

 

 

 

 

 

[peter lena 8,634]

@SCOTT S, GOOD TO HAVE YOU ON BOARD , that is a great pick up for you , also note the condition of the snow blower , looks practically unused , no auger bends or paint wear , stay after the gear drive chain lubrication , really helps .  whenever i see a neglected paint finish , the first thing i do is MARVEL MYSTERY OIL , RUB DOWN . IT WILL MAKE THAT PAINT JUST POP WITH SHINE , VERY EASY TO DO , CLEAN CLOTH WITH OIL , AND RUB DOWN TILL DRY , do all your paint , let sit a day , and do it again , send us a picture, the inspiration of that  clean shinny paint will inspire you to do more . I personally would love to recover a rig like that , couple of weeks , of baseline service verification and clean up will give you a terrific entry into wheel horse world , wish i were closer  to you , i would oil that down my self to show you how its done , good luck , pete

[OldWorkHorse 3,045]

[953 nut 55,316]

16 hours ago, Scott s said:

thank the forum for all the great information on the wheel horses.

                Glad you have found us helpful, be sure to ask any questions that may come up.