Snow plow

[dooley1337 11]

I have a 1973 (no name) 8HP 4 speed. I was wondering what snow plow models fit it (if any)? thanks

[stevasaurus 22,711]

Welcome to Red Square...any "B" or "C" series snow blade will work.  This will help, if you need more information...please ask.

 

 

[SylvanLakeWH 25,496]

 

And 

[Maxwell-8 4,275]

 on and uhm,  of your 8hp!

[Pullstart 62,807]

 

I have a snow plow for sale and a C series tractor I could test fit it on... though I’d be concerned it’s too short.

https://www.wheelhorseforum.com/classifieds/for-sale/42”-short-frame-snow-plow-dozer-blade-r9472/

 

[stevasaurus 22,711]

@pullstart  That snow blade, being the older style, I think is going to be too short.  It may fit on a "B" or "C" but you may not be able to steer.  The blade would hit the front tires.

[gwest_ca-(File Mod) 11,033]

Your tractor is a medium frame model with a 43-1/2" wheelbase but uses the long frame blades

 

Here are the blades that will fit

1968 model 6-4111 - First to fit LONG & SHORT frame tractors and first to mount under the rear axle with a loose A-frame crossbar - replaced by

1969 model [6-4112 + 6-9621]

1970-73 model [6-4113 + 6-9622]

1973-74 model [6-4113 + 6-9623]

1974 model [6-4114 + 6-9624]

1974 model 6-2131

1975 model 6-2132

1976 model 6-2133

1976 model 66-42BC01

1977 model 76-42BC01

1978 model 86-42BC01

1979 model 96-42BC01

1980 model 06-42BC01 - (Last blade to have a loose A-frame crossbar #7701)

1981-1984 model 06-42BC02 (Up to here including this one they are 42" wide) and (First blade to have a welded-in rear A-frame crossbar)

1984-1989 model 06-48BC01 (They are now 48" wide) - replaced by the following

1990 model 06-48BC02 (Last blade to have 3 angle positions)

1991-1993 model 06-48BC03 (First blade to have 5 angle positions)

1993-2001 model 79350 - (105-1502 kit adapts 2001 and older GT Classic-Series blades to fit 2002 and later tractors

2002 2004-2009 2012 model 79364 - (105-1501 kit adapts 79364 blade to fit 2001 and older GT Classic-Series)

 

Garry

[dooley1337 11]

On 5/5/2021 at 5:03 PM, Maxwell-8 said:

 on and uhm,  of your 8hp!

 

[Wheel Horse 3D 3,791]

I've got the blade that came with Dug( C141 Auto), and since I'm gettin' the FEL I don't see me using it. I'm not sure exactly what it's worth but would be willing to part with it. Should have pics here shortly.

Edited May 7, 2021 by Wheel Horse 3D

[dooley1337 11]

Just the blade or the blade and the mounts?

[Wheel Horse 3D 3,791]

1 minute ago, dooley1337 said:

Just the blade or the blade and the mounts?

Its the complete setup. I don't recall right off if its a 42 or a 48. and if it has the 3 position or 5 position angle. Once Mrs. Sends me some pics I can narrow it down to specifics for ya. But this attaches into your attach-a-matic mounts, and to your deck height lever. Should mount right up and be good to go.

[Wheel Horse 3D 3,791]

[Wheel Horse 3D 3,791]

1979 42" with the 3 position pivot. The pivot control rod needs straightened a little and some new cotter pins.

 

[dooley1337 11]

1 hour ago, Wheel Horse 3D said:

1979 42" with the 3 position pivot. The pivot control rod needs straightened a little and some new cotter pins.

 

Looks good to me. Next question is how much? And we aren't exactly neighbors lol so how can I pick it up? Meet half way somewhere or something?

 

[Wheel Horse 3D 3,791]

Lol yeah its a bit of a haul. Maybe Akron? Thats 4-5 hrs from me. I'll PM ya!