Commando800 32 #1 Posted April 30, 2021 New to the site and joined about issues parts and ext. very glad to be on the page. 5 3 Share this post Link to post Share on other sites
cafoose 3,355 #3 Posted April 30, 2021 (edited) to My neck was hurting looking at that Edited April 30, 2021 by cafoose 1 1 7 Share this post Link to post Share on other sites
Pullstart 63,054 #5 Posted April 30, 2021 Nice herd you got there! That Commando 800 is a good runner, hard to believe that’s what my kid daughter’s used to look like! 1 Share this post Link to post Share on other sites
Commando800 32 #6 Posted April 30, 2021 Awesome love the twin stacks! 1 Share this post Link to post Share on other sites
Pullstart 63,054 #7 Posted April 30, 2021 2 minutes ago, Commando800 said: Awesome love the twin stacks! We had a welding project in shop class last year... they are functional and still kept a muffler 1 Share this post Link to post Share on other sites
Alex175 784 #8 Posted April 30, 2021 Welcome! Glad to have you here. 1 Share this post Link to post Share on other sites
WHX?? 49,100 #9 Posted April 30, 2021 (edited) You name it we got ... parts, manuals, advice, characters.... Edited April 30, 2021 by WHX24 1 Share this post Link to post Share on other sites
WHX?? 49,100 #10 Posted April 30, 2021 1 hour ago, pullstart said: Not hard to believe that I don't have any tractors that look like they did when they left the factory.... 1 Share this post Link to post Share on other sites
Commando800 32 #11 Posted April 30, 2021 21 minutes ago, WHX24 said: You name it we got ... parts, manuals, advice, characters.... do you think you would have a manual for a 1971 commando 800? Share this post Link to post Share on other sites
Jeff-C175 7,203 #12 Posted April 30, 2021 17 minutes ago, Commando800 said: do you think you would have a manual for a 1971 commando 800? I'm certain you can find anything you need in the "MANUALS" section! https://www.wheelhorseforum.com/forum/112-wheel-horse-manuals/ Share this post Link to post Share on other sites
Commando800 32 #13 Posted April 30, 2021 1 minute ago, Jeff-C175 said: I'm certain you can find anything you need in the "MANUALS" section! https://www.wheelhorseforum.com/forum/112-wheel-horse-manuals/ Thank you I really appreciate it! Share this post Link to post Share on other sites
Jeff-C175 7,203 #14 Posted April 30, 2021 3 minutes ago, Commando800 said: Thank you I really appreciate it! I took a quick look and didn't immediately find an exact year match, but try the '72 it will be 'close enough' Share this post Link to post Share on other sites
Commando800 32 #15 Posted April 30, 2021 7 minutes ago, Jeff-C175 said: I took a quick look and didn't immediately find an exact year match, but try the '72 it will be 'close enough' I really appreciate it Jeff-c175 3 Share this post Link to post Share on other sites
WHX?? 49,100 #16 Posted April 30, 2021 1 hour ago, Commando800 said: do you think you would have a manual for a 1971 commando 800? Get us the model # off the tag under the dash and we'll nail down the year. 1 Share this post Link to post Share on other sites
Commando800 32 #17 Posted April 30, 2021 7 minutes ago, WHX24 said: Get us the model # off the tag under the dash and we'll nail down the year. Share this post Link to post Share on other sites
Snoopy11 5,714 #18 Posted April 30, 2021 3 hours ago, pullstart said: We had a welding project in shop class last year... they are functional and still kept a muffler Yeah... those look... 10 times better than the stack I made. I mig weld only... so my welds are not the best looking... BUT I have never had anything come apart! I just did not like the way my tractor performed with the stack. (someone may logic this out better than me)... but it was either too much or not enough back pressure (I am thinking not enough). I could run a muffler on mine... I just decide not to after all the comments I have gotten. The UPS guy told me that is sounds pretty rowdy... LOL That is what I like about it, it looks and sounds different than anything anyone has ever seen. Wait... I wasn't supposed to be talking about my tractor... I did notice on mine also, that I needed a support for the exhaust since it was about 10 times heavier with the stack. I did have to weld that support on (before I took the whole stack off --I know... all that work for nothing). Did you find the same thing... or was your stack okay as-is without any supports? Don 1 Share this post Link to post Share on other sites
Pullstart 63,054 #19 Posted April 30, 2021 1 minute ago, Snoopy11 said: e. I mig weld only... These welds were MIG only also. The only TIG I’ve done on my tractors lately has been the loader project... https://www.wheelhorseforum.com/topic/68968-ark-500-loader-rebuild-on-a-522xi/?page=7&tab=comments#comment-957419 Share this post Link to post Share on other sites
Snoopy11 5,714 #20 Posted April 30, 2021 1 minute ago, pullstart said: These welds were MIG only also. The only TIG I’ve done on my tractors lately has been the loader project... https://www.wheelhorseforum.com/topic/68968-ark-500-loader-rebuild-on-a-522xi/?page=7&tab=comments#comment-957419 I... actually watched one of your videos on this. If you wouldn't mind sharing, about how much do you think everything is costing you to throw the loader on? SOOOO... I am keeping a loader idea in the back of my mind for my L-157. ...I know... very small tractor... but still something I am keeping in the back of my mind. I was... thinking... something like this. I know it will need fab work... etc... but I wonder if it would work... https://www.tractorsupply.com/tsc/product/husqvarna-fs36-36-in-front-scoop-attachment-588181401-1546195?cm_mmc=feed-_-GoogleShopping-_-Product-_-1546195&gclid=Cj0KCQjw1a6EBhC0ARIsAOiTkrFosOfRzZ4wvOuekqnmYLfP91Id0P2WRmeO0nLONsXUuw8sCdmSel0aAvorEALw_wcB# Don Share this post Link to post Share on other sites
Pullstart 63,054 #21 Posted April 30, 2021 2 minutes ago, Snoopy11 said: wouldn't mind sharing, about how much do you think everything is costing you to throw the loader on? uhhhh. I. Don’t. Know. 1 Share this post Link to post Share on other sites
Snoopy11 5,714 #22 Posted April 30, 2021 6 minutes ago, pullstart said: uhhhh. I. Don’t. Know. I am laughing... I say the same thing when people ask how much money I have into engines... (I will just say... 4 digits)... Considering that each engine costs... over 400$ and I have a couple of them... plus all the parts I have and the ones I keep buying. China has made a lot of money off of me... LOL Don 2 Share this post Link to post Share on other sites
Snoopy11 5,714 #23 Posted April 30, 2021 14 hours ago, Commando800 said: New to the site and joined about issues parts and ext. very glad to be on the page. Beautiful horses! Share this post Link to post Share on other sites
Commando800 32 #24 Posted April 30, 2021 1 minute ago, Snoopy11 said: Beautiful horses! Thanks! Share this post Link to post Share on other sites
Commando800 32 #25 Posted April 30, 2021 3 minutes ago, Snoopy11 said: Beautiful horses! My 800 is all original down to value stem caps 2 1 Share this post Link to post Share on other sites
