Crazyredhorse 295 #1 Posted April 29, 2021 ordering parts to fix up my 1988 252 h need a gas cap.cant find any diagrams of it to get a part # it has one of the float gauge caps on it.anyone know what would fit. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,046 #2 Posted April 29, 2021 113867 and no longer available https://www.partstree.com/models/22-13ke01-252-h-toro-yard-tractor-1988/engine-fuel-exhaust-systems-14/ Share this post Link to post Share on other sites
Achto 27,604 #3 Posted April 29, 2021 You could use one that has a little shorter float travel. It won't be completely accurate but will look the part. I have also used a cap without the gauge on it, just gotta remember to look down the hole to see if you have enough gas to get the job done. 3 Share this post Link to post Share on other sites
pacer 3,173 #4 Posted April 29, 2021 Do a search for "Kelch fuel caps" on the bay -- there are dozens of variations there. (note" there are threaded and 'tabbed/eared types) 2 Share this post Link to post Share on other sites
WHX?? 48,828 #5 Posted April 29, 2021 (edited) Try here ... lots of other good info on thread sizes and what not. capsandgauges.com Edited April 29, 2021 by WHX24 1 Share this post Link to post Share on other sites
Crazyredhorse 295 #6 Posted April 29, 2021 thanks guys now have a part # that doesn't lead me to a exact fit so far. lol guessing its vented tank blow up like balloon in the heat keep looking see what I can find. Share this post Link to post Share on other sites
bds1984 1,435 #7 Posted April 29, 2021 I just bought a new gas cap with a gauge off of the jungle site. I saw a few with lengths between 7" and 9" so maybe the odds of you finding on there will be in your favor. Do you have the old one still? Share this post Link to post Share on other sites
Crazyredhorse 295 #8 Posted April 29, 2021 (edited) yes still have it gauge is busted out .but I see those with lengths just dont know about treads hate to drop 20 on Hope's there right none say specific they fit that part # its 2 1/4 mouth 4 inch drop on float guess I'm not the only one Edited April 30, 2021 by Crazyredhorse Share this post Link to post Share on other sites
cJ_3D 9 #9 Posted June 12 (edited) On 4/29/2021 at 2:12 PM, Crazyredhorse said: yes still have it gauge is busted out .but I see those with lengths just dont know about treads hate to drop 20 on Hope's there right none say specific they fit that part # its 2 1/4 mouth 4 inch drop on float guess I'm not the only one Did you ever happen to find anything that worked, and do you have a link or PN for what you used? I'm in the same boat now lol. Thanks! Edited June 12 by cJ_3D Share this post Link to post Share on other sites
CCW 1,295 #10 Posted June 12 1 hour ago, cJ_3D said: Did you ever happen to find anything that worked, and do you have a link or PN for what you used? I'm in the same boat now lol. Thanks! I bought a new Kelch cap from this site and it works perfectly. Gas cap - Wheel Horse Tractors - RedSquare Wheel Horse Forum 1 Share this post Link to post Share on other sites
