ebinmaine 67,309 #1 Posted April 18, 2021 I had Grey @Wheel Horse 3D print up a few things for us. Trina and I were jabber jawing about everything and nothing one day and door knockers crossed through the conversation. I figured I'd see about a Wheelhorse piece. Today Trina spent some time sanding and priming it. She left texture some places and smoothed out others. For scale, the backer is approximately 4 x 6 inches 11 4 Share this post Link to post Share on other sites
Wheel Horse 3D 3,791 #2 Posted April 18, 2021 Nice! Did ya figure that the ring and ball can be removed? And is that a filler primer, looks really nice! 1 Share this post Link to post Share on other sites
ebinmaine 67,309 #3 Posted April 18, 2021 8 hours ago, Wheel Horse 3D said: Nice! Did ya figure that the ring and ball can be removed? And is that a filler primer, looks really nice! Yessir. Figured if you out it together it had to come apart. We have carabineers with the same type of latch. Primer is BBT/Paint Department standard go-to Rust-Oleum 2X Red Oxide. No filler to it. It looks that way because she set n sanded it for maybe an hour ((??)) To get the texture she wanted. Crazy what proper actual prep work will do for you isn't it? 😀👍 I'm still not enlightened as to her color scheme..... Share this post Link to post Share on other sites
Mickwhitt 4,593 #4 Posted April 18, 2021 What knockers!!! Young Frankenstein, hilarious. Looks good Eric, will look fine on the drawbridge... Mick 1 1 1 Share this post Link to post Share on other sites
Mickwhitt 4,593 #5 Posted April 18, 2021 "What Knockers!" 1 1 Share this post Link to post Share on other sites
haydendavid380 759 #6 Posted April 18, 2021 That is too cool. 1 Share this post Link to post Share on other sites
