krystolo 504 #1 Posted April 17, 2021 This part has been discontinued, and I haven't had luck on Ebay or A-Z. Any ideas as to what I can used as a substitute until a used one comes up? Share this post Link to post Share on other sites
squonk 41,155 #2 Posted April 17, 2021 Place an wanted ad in Classified. Any handle for a C-160 should work probably doesn't need to be that part number. 2 Share this post Link to post Share on other sites
krystolo 504 #3 Posted April 17, 2021 @squonk it the little squeeze lever to adjust the blade. I don't know if that part is available on other handles. Ideas? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,046 #4 Posted April 17, 2021 5107 was used on 105 different models up until 1997 and then they went to 98-1743 and a cable instead of the wire so the hole drilled in it may be a different size where the link connects. It may work. https://www.partstree.com/models/79364-toro-48-snow-dozer-blade-for-300-series-garden-tractors-sn-220000001-220999999-2002/frame-assembly-1/ Garry 2 Share this post Link to post Share on other sites
ebinmaine 67,619 #5 Posted April 17, 2021 Seems like one of them could be made up fairly easily. @krystolo do have access to a welder? 1 Share this post Link to post Share on other sites
Ed Kennell 38,227 #6 Posted April 17, 2021 Here's the one I made for my 520 inside the cab control. 4 Share this post Link to post Share on other sites
krystolo 504 #7 Posted April 19, 2021 On 4/17/2021 at 6:24 PM, ebinmaine said: Seems like one of them could be made up fairly easily. @krystolo do have access to a welder? Unfortunately, no. I got a hit on my classified ad, though! 1 Share this post Link to post Share on other sites
