gwest_ca-(File Mod) 11,053 #1 Posted April 9, 2021 I recall front hub bearings were not available for for 1" axles but don't know for which models. Possible the D-Series? Ran across these with 2" OD. https://www.bantasaw.com/catalog/viewproduct.asp?i=&p=4403 Toro Commercial part number 251-299 Garry 1 Share this post Link to post Share on other sites
pacer 3,174 #2 Posted April 9, 2021 I'm just finishing up a "clean-up" on the front rims of a D200 and while I didnt remove them - they seemed to be in good condition - I did notice that the bearings appeared to be flanged and were definitely 1" Couple yrs ago I was converting a D180 to the 1" axle/spindles and could not find flanged bearings in 1". Ended up making/machining up a hub using conventional roller bearings. While I was at it I went ahead and made the hub to accept conventional lug nuts..... 1 Share this post Link to post Share on other sites
Pollack Pete 2,273 #3 Posted April 9, 2021 Had nightmares a couple years ago looking for 1 inch front wheel bearings for a C-195.No one seems to make them.Checked bearing supply stores and on-line bearing suppliers.No luck.Finally found a couple new ones on e-bay.Was thinking of machining a couple out of oil lite,but didn't have to. 2 Share this post Link to post Share on other sites
sparkie333 265 #5 Posted April 10, 2021 22 hours ago, Pollack Pete said: w ones on e-bay. I have found most anything I need on Ebay. Good luck. 1 Share this post Link to post Share on other sites
