The quickie

[Renrag 69]

Well after 2 years i figured it was time to refresh the skin of my horse. After about 5 days spraying and approx 5 coats of clear, this is what come of my inexpensive quick paint job. There are some flaws, but i can fix those over time, till i can do it better. Thats all i can get it to let me upload. Sorry ik i got the tires haven't cleaned them yet either.

[Pullstart 63,505]

Looks good enough to work and get dirty 

 

If you haven’t before, please consider becoming a supporting member.  Not only does it unlock your ability to upload more pictures, it helps to preserve this site for years to come!

[rjg854 11,703]

  what pullstart posted

[Renrag 69]

How would i check into that?

[Renrag 69]

Where or who could i talk to about starter for it, my magnets

shattered in mine and i couldn't fix it thiss time. My 93 craftsman starter works on it, but can't find another one of them either, atleast by motor number

Edited March 31, 2021 by Renrag

[Pullstart 63,505]

14 hours ago, Renrag said:

How would i check into that?

Heading to the RedSquare store will get you options for membership as you see fit.  

 

https://www.wheelhorseforum.com/store/ 

[Pullstart 63,505]

14 hours ago, Renrag said:

Where or who could i talk to about starter for it, my magnets

shattered in mine and i couldn't fix it thiss time. My 93 craftsman starter works on it, but can't find another one of them either, atleast by motor number

What engine is in that machine?  I see it is a vertical shaft, but I’m guessing some details need to be made clear.  

[Renrag 69]

Sorry busy couple days, it's a 82 11h briggs on horse with a 16 tooth gear. My 93 12h craftsman briggs fits and works, only difference is the way the cone set up is. I've found 2 that say fits 83 11h, but not listing for 82, is there any difference in 1 year? I'm  just learning on some of these facts. This is my first horse and a learning experience, I'm going to see if my 2015 ariens 17.5 would work, but it is a lot newer, close set up tho. I figure if it fits might be easier finding a one for it. Thanks for at least checking on my posts y'all.

    Oh yeah I went over the dash lettering today with white paint, I'll get picks after I clean it up a little. A paint marker does great untill you dab it a little to much leaving it to splatter 🙄, but all in all looks good, finally can read that I was supposed to read owners manual to operate 😂, boy I'm like 25 years late on that one. 

Edited April 2, 2021 by Renrag

[Renrag 69]

Just a little added lighting too, I just need to find a old blinker to make that tail light blink. If I asked $600 for this machine and all the stock parts I set aside, all but the rear fenders (stock) are missing, would that be to much? I have way more in it, heck just deck alone cost half that to rebuild.

Edited April 13, 2021 by Renrag

[Pullstart 63,505]

There are plenty of people who could find the value in this machine.  Many people say if it mows it’s worth at least $300.  Adding up what you have into it in your sales ad, you might find someone looking for a lawn duty machine.  Being that it’s a vertical shaft engine, the platform isn’t built as tough as what many of us here are used to... but that doesn’t mean it’s worthless.