New project - Super C

[Jeff-C175 7,202]

Some sort of locking diff?

 

[Wheel Horse 3D 3,795]

ARRRRGGGGHHH the SUSPENSE!!!!!!!!!!!

 

Its ALMOST as bad as Colossus!

Edited March 26, 2021 by Wheel Horse 3D

[Tractorhead 9,064]

It‘s a dwarf catcher Attachement. 😂

 

I believe a Hardy Clutch for a angeling Attachement

[Oldskool 6,644]

Just now, Tractorhead said:

It‘s a dwarf catcher Attachement. 😂

 

🤣🤣🤣

[SylvanLakeWH 25,600]

2 hours ago, Wheel Horse 3D said:

Colossus!

Theres that word again...

 

Vague recollection...

 

Deep history...

 

Can’t recall...

 

[meadowfield 2,570]

3 hours ago, Jeff-C175 said:

Some sort of locking diff?

 

 

10 house points!  

[Jeff-C175 7,202]

4 minutes ago, meadowfield said:

 

10 house points!  

 

I wanna cash out!  Is that enough for a pint or two?  

Edited March 26, 2021 by Jeff-C175

[ACman 7,618]

Where’s the turning brakes at ? .... 

Edited March 26, 2021 by ACman

[elcamino/wheelhorse 9,326]

3 hours ago, Wheel Horse 3D said:

ARRRRGGGGHHH the SUSPENSE!!!!!!!!!!!

 

Its ALMOST as bad as Colossus!

The Colossus project make hit the 400 page mark. Nothing against EB , grandma was slow but she was old. 

[ebinmaine 67,610]

3 hours ago, Wheel Horse 3D said:

ARRRRGGGGHHH the SUSPENSE!!!!!!!!!!!

 

Its ALMOST as bad as Colossus!

 

1 hour ago, SylvanLakeWH said:

Theres that word again...

 

Vague recollection...

 

Deep history...

 

Can’t recall...

 

 

19 minutes ago, elcamino/wheelhorse said:

The Colossus project make hit the 400 page mark. Nothing against EB , grandma was slow but she was old. 

 

 

 

I think it's safe to say this thread will be completed before mine....

 

[Wheel Horse 3D 3,795]

3 minutes ago, ebinmaine said:

 

 

 

 

 

I think it's safe to say this thread will be completed before mine....

 

You do know the door knocker project now has a name????? Well call it Colossus Too.

 

Edited March 26, 2021 by Wheel Horse 3D

[ebinmaine 67,610]

3 minutes ago, Wheel Horse 3D said:

Too.

I see what you did there. Well played. 

[Pullstart 62,912]

Selectable exterior locker!  Woo hoo!  There’s just no more room inside that case, huh Mark?

[Stormin 9,981]

19 hours ago, Jeff-C175 said:

 

I wanna cash out!  Is that enough for a pint or two?  

 

I'll have them for you. I'm a bit nearer.

 

Just a couple of thoughts. That dog clutch for a winch. Or even more wrong. Front wheel drive only.

[8ntruck 7,016]

3 hours ago, pullstart said:

Selectable exterior locker!  Woo hoo!  There’s just no more room inside that case, huh Mark?

Ya know, that's not a half bad idea.  Would be easy to make and install.  Might even be able to include turning brakes in the assembly.

[Jeff-C175 7,202]

54 minutes ago, Stormin said:

I'm a bit nearer

 

No problem, enjoy!  Cheers!  Besides, shipping would be a bit dear!  

[Oldskool 6,644]

Just now, 8ntruck said:

 Might even be able to include turning brakes in the assembly.

I have a set of those in the works right now.

[meadowfield 2,570]

4 hours ago, pullstart said:

Selectable exterior locker!  Woo hoo!  There’s just no more room inside that case, huh Mark?

 

there is, but I figured if I make an external one this time it's possibly easier for you guys to copy  

[ACman 7,618]

Could you add some disc on the shaft and mount the caliber somewhere? Simple hydraulic setup for go kart .

Edited March 27, 2021 by ACman

[meadowfield 2,570]

16 hours ago, ACman said:

Could you add some disc on the shaft and mount the caliber somewhere? Simple hydraulic setup for go kart .

 

Jeff,

 

I had considered that, but given two of my bigger tractors have them and I've never used them,  I thought it was overkill.

 

Note the Difflock on the John Deere is used a lot in conjunction with 4WD.... and I see it as more useful.

 

Edited March 28, 2021 by meadowfield

[Pullstart 62,912]

I’m sure I’ll see the story unfold soon... but this is saying it can be engaged within 1/3 of a slipped rotation?  Since it doesn’t guarantee engagement right now, will the fork be spring loaded?  Let it slip into place slowly?

[meadowfield 2,570]

32 minutes ago, pullstart said:

I’m sure I’ll see the story unfold soon... but this is saying it can be engaged within 1/3 of a slipped rotation?  Since it doesn’t guarantee engagement right now, will the fork be spring loaded?  Let it slip into place slowly?

 

given the gearing, it will be about 1/6 rotation as the pinions on the end increase the speed. Not worked out how the engage will work, it ideally needs springs to pull it out as it will naturally lock and not want to release. It will be using the High low shifter to lock it - thus retaining the original wheel horse look.

[Pullstart 62,912]

31 minutes ago, meadowfield said:

 

given the gearing, it will be about 1/6 rotation as the pinions on the end increase the speed. Not worked out how the engage will work, it ideally needs springs to pull it out as it will naturally lock and not want to release. It will be using the High low shifter to lock it - thus retaining the original wheel horse look.

Would low be auto locking then?  Awesome!

[meadowfield 2,570]

been preoccupied for lots of reasons, but back on it....

 

 

stay tuned  

Edited July 5, 2021 by meadowfield

[Tractorhead 9,064]

@meadowfield cool idea.

 

👍