Blackhood Bill 721 #1 Posted March 19, 2021 (edited) Trying to find out what tractor this is. A friends of a friends dad died and the daughter is trying to sell it and wanting to know what it might be worth. Looking for opinions. I believe it to be a GT14. I have asked for a close up pic of the ID tag, waiting for that. I do realize that if it is a GT14 it does not have the correct engine in it. Again just looking for opinions. Thanks in advance. Edited March 19, 2021 by Blackhood Bill Corrected spelling error Share this post Link to post Share on other sites
squonk 41,155 #2 Posted March 19, 2021 It's a Gee TEE alright. Pretty cobbled up. Not worth a heck of a lot. Maybe $200 if it runs enough to drive it to check the transmission. 3 Share this post Link to post Share on other sites
Blackhood Bill 721 #3 Posted March 19, 2021 1 minute ago, squonk said: It's a Gee TEE alright. Pretty cobbled up. Not worth a heck of a lot. Maybe $200 if it runs enough to drive it to check the transmission. @squonk that’s what I left out! I was told it don’t run. I was not told why it don’t run. Share this post Link to post Share on other sites
squonk 41,155 #4 Posted March 19, 2021 Prolly not much good except for parts then. Very specific parts used on them along with their own mower deck. UNLESS your looking for a major reclamation project! Share this post Link to post Share on other sites
Blackhood Bill 721 #5 Posted March 19, 2021 @squonk well the friend suggested depending on value to tell them to junk it. I said no, with maybe getting it for nothing. Could be a one day total restoration project! Share this post Link to post Share on other sites
SylvanLakeWH 25,600 #6 Posted March 19, 2021 (edited) Post it for $50. Bet it would find a new home, save a , and save a trip to the junkyard... Edited March 19, 2021 by SylvanLakeWH 2 2 Share this post Link to post Share on other sites
Jeff-C175 7,202 #7 Posted March 19, 2021 Is that a Hearse in the background? Share this post Link to post Share on other sites
pacer 3,173 #8 Posted March 19, 2021 Pretty big ..... mess? Ive had a few cobbles but that one is pretty bad ---- BUT, it is a GT. and parts wise it has some value, looks like there would be a good many parts in there. Share this post Link to post Share on other sites
Blackhood Bill 721 #9 Posted March 19, 2021 (edited) 56 minutes ago, Jeff-C175 said: Is that a Hearse in the background? @Jeff-C175 don’t know I have not gone there to check out the kinda looks like it in that picture to me also. Edited March 19, 2021 by Blackhood Bill 1 Share this post Link to post Share on other sites
haydendavid380 759 #10 Posted March 19, 2021 Does it have the 3 point? Share this post Link to post Share on other sites
19richie66 17,508 #11 Posted March 19, 2021 It appears to be a 1969 gt14 that someone cobbled up a hydraulic tank out of the fuel tank. The engine is wrong for sure. Agreed .......the cheaper the better. Share this post Link to post Share on other sites
953 nut 55,321 #12 Posted March 19, 2021 Seat and fuel tank/grill are '69. If it was close by I'd give $ 100 for parts I need for my GT-14. 2 Share this post Link to post Share on other sites
Blackhood Bill 721 #13 Posted March 20, 2021 3 hours ago, haydendavid380 said: Does it have the 3 point? @haydendavid380 I don’t know at this point since I have not gone to check it out. Plan to check it out tomorrow and get a better look and picture for those who might need parts or for someone wanting to restore. As in an earlier post maybe if cheap enough a total restoration project for another day. Will update when I get more info. 2 Share this post Link to post Share on other sites
Pullstart 62,912 #14 Posted March 20, 2021 14 hours ago, 19richie66 said: It appears to be a 1969 gt14 that someone cobbled up a hydraulic tank out of the fuel tank. The engine is wrong for sure. Agreed .......the cheaper the better. good eye! I wonder what’s wrong with the transmission hydraulic system? Share this post Link to post Share on other sites
Pullstart 62,912 #15 Posted March 20, 2021 @Blackhood Bill I’m no expert. I see $50-100 depending on the buyer and seller’s agreeing on it. It’s more than scrap value though! Side note, I’m a sucker for a buggy picture and I see one in front of the tractor. If you make it to check it out, please take pictures of that too Share this post Link to post Share on other sites
Blackhood Bill 721 #16 Posted March 23, 2021 Well today a cash offer was made. We will see how that goes, don’t know what I’m going to do with it. But who knows 1 1 Share this post Link to post Share on other sites
Aldon 4,826 #17 Posted April 4, 2021 The belt cover is not easy to source and is chopped to allow the Hydraulics out the side. It’s missing original engine and Electric PTO. i wouldn’t take that on as a project. Way too much missing. I might haul off for parts if I was building another. if it has 3 point that adds value as does a double Hydro Pulley for tiller. 2 Share this post Link to post Share on other sites
Pullstart 62,912 #18 Posted April 4, 2021 On 3/22/2021 at 9:08 PM, Blackhood Bill said: Well today a cash offer was made. We will see how that goes, don’t know what I’m going to do with it. But who knows 12 hours ago, Aldon said: The belt cover is not easy to source and is chopped to allow the Hydraulics out the side. It’s missing original engine and Electric PTO. i wouldn’t take that on as a project. Way too much missing. I might haul off for parts if I was building another. if it has 3 point that adds value as does a double Hydro Pulley for tiller. If any sheet metal or other parts are needed... 1 Share this post Link to post Share on other sites
