A Horse named Hiram

[WHX?? 48,814]

Ouch... 

[ebinmaine 67,412]

AAAGGGGHHHHHH

[Pullstart 62,834]

I’m nowhere near Maine.  Eyes. Watering.

[Tractorhead 9,064]

I knew nobody likes smat- ass but how about protective googles ?

[Oldskool 6,643]

40 minutes ago, Tractorhead said:

I knew nobody likes smat- ass but how about protective googles ?

I have them and use them, plus I have eyeglasses. I had it happen once years ago. Didnt like it. This was an unplanned last cut that went totally wrong. Wrong place wrong time.

[Oldskool 6,643]

I'm a firm believer in safety first. I do get bulling around at times and walk the line a bit. Along with that I'm about as graceful as a Gazellephant.

[Pullstart 62,834]

7 minutes ago, Oldskool said:

 I'm about as graceful as a Gazellephant.

we must be cuzzies...  I have a lifetime membership to the bumps and bruises club!

[Oldskool 6,643]

32 minutes ago, pullstart said:

we must be cuzzies...  I have a lifetime membership to the bumps and bruises club!

Oh I think I own stock in that club 

[Handy Don 12,210]

On 3/19/2021 at 5:28 PM, Oldskool said:

Maybe I should repower with this? Just picked this up today.

 

Now that you explain, I do remember seeing one of these in action in a museum demo somewhere. They had it outside on the lawn washing dishrags. Thanks for posting it.

[Oldskool 6,643]

I need info on the clutch/brake pedal return spring. Size and fastening location would be great. I'm gearing up for a 3 day weekend ahead. I hope to get alot done. 

[ebinmaine 67,412]

Just now, Oldskool said:

I need info on the clutch/brake pedal return spring. Size and fastening location would be great. I'm gearing up for a 3 day weekend ahead. I hope to get alot done. 

Keeping it as a single pedal it'll be like Trina's 867 Pigpen. 

Gimme a few minutes. I'll send some pics. 

 

[Oldskool 6,643]

Always working with as much on hand as possible i had to make a shaft adapter for the pulley. The engine I chose had a stepped shaft.

[Oldskool 6,643]

The belt is on. I hope it correct. Also working on a parking brake. I think I'm making headway.

[Pullstart 62,834]

The belt looks great!  Is it fabric/Kevlar coated?  The parking brakes looks functional, but the spring doesn’t seem “right” for some reason.  Maybe it’s needed because of the excess weight of the rod on top?

Edited March 26, 2021 by pullstart

[Oldskool 6,643]

1 hour ago, pullstart said:

The belt looks great!  Is it fabric/Kevlar coated?  The parking brakes looks functional, but the spring doesn’t seem “right” for some reason.  Maybe it’s needed because of the excess weight of the rod on top?

The spring it set to auto engage the parking brake. I can clutch  before it auto sets. After looking at it I probably should have it auto release instead. Maybe that's why the spring looks wrong?

[Oldskool 6,643]

1 hour ago, pullstart said:

The belt looks great!  

There should be a tension spring on it somewhere. The only thing holding it tight is the brake spring at the moment

[ebinmaine 67,412]

6 minutes ago, Oldskool said:

auto release instead

That's what you want right there

[Pullstart 62,834]

2 hours ago, Oldskool said:

There should be a tension spring on it somewhere. The only thing holding it tight is the brake spring at the moment

there should be a spring from the rib on the top of the left axle housing to the brake/clutch rod.  That’ll give you belt tension.

[Oldskool 6,643]

If someone was going to reline a brake band what's the best way to do it.? I've seen where people have used everthing from actual woven brake material to leather. Mcmaster offers a molded liner and woven. Has anyone had any experience with the molded? I have also seen where people have used all differant types of adhesives. Anything from Gorilla Glue to Liquid nails. I would like to hear some input. Good and bad.

[Gregor 4,846]

I don't know anything about the lining material, but I have never had good luck with Gorilla Glue. It may be good for porous material, if you have a few months to let it set up, but it's never worked good for me. Others may have had better luck with it.

[Oldskool 6,643]

Just now, Gregor said:

 but I have never had good luck with Gorilla Glue. 

I cant say I have either. Definitely bottom on my list.

[ebinmaine 67,412]

I bought a roll of brake lining material from McMaster-Carr. 

 

I attach it width clear silicone and about 8 or 10 zip ties. Several applications including the Cinnamon Horse C160 which gets worked pretty good. 

No issues. 

 

Highly recommend going that route. 

 

Gimme a width and length. I'll see what the stuff I have here is for size. 

 

 

[SylvanLakeWH 25,525]

Vendor on this site:

 

 

[Oldskool 6,643]

10 minutes ago, ebinmaine said:

I bought a roll of brake lining material from McMaster-Carr. 

 

I attach it width clear silicone and about 8 or 10 zip ties.

How did you utilize the zip ties?

[ebinmaine 67,412]

5 minutes ago, Oldskool said:

How did you utilize the zip ties?

I had Trina hold the lining in place and ziptied her hand to it.