WH decals

[Dennis C. 142]

Did Glen Pettit go out of business? I purchased from him over year ago but his email is no longer active. Does he have a phone listing? Thanks

[ebinmaine 69,713]

Not sure about Glenn but if you want decals you want to get a hold of Terry the vinyl guy

 

@Vinylguy

 

[Achto 28,192]

 Terry is the go to guy for decals. https://www.redoyourhorse.com/

[Pullstart 63,542]

Yep yep yep!  Terry is the man!

[TJ5208 1,824]

I've heard of redyouhorse.com 

[Dennis C. 142]

my bad, I didn't mean decals. I meant to write reproduction plastic and rubber parts.

[Ed Kennell 39,738]

2 hours ago, Dennis C. said:

Does he have a phone listing?

I couldn't find a phone #, but his US postal address is in his vendors listing.

[Jeff-C175 7,203]

I just received the vinyl decal set from Terry a couple days ago for my C-175.

 

QUALITY STUFF!   Thanks Terry!

 

@Vinylguy

Edited March 10, 2021 by Jeff-C175

[Jeff-C175 7,203]

1 hour ago, Dennis C. said:

reproduction plastic and rubber parts

 

Specifically?

 

Lowell @ wheelhorsepartsandmore has some things also.

 

[WHX?? 49,924]

He had a stroke awhile back Dennis and is probably still trying to recover. I could really use a 701 dash so let us know if you succeed in getting ahold of him. 

Maybe we can cajole Lowell into taking up Glen's work if he no longer does. 

Ahem @wheelhorseman..... 

[Dennis C. 142]

WHX24. I've tried his old email address that is posted on the Vendor list here and it comes back undeliverable.

I've checked with other suppliers I use and they only have his email address, no phone number. I know he was sick before.

[Dennis C. 142]

49 minutes ago, Jeff-C175 said:

 

Specifically?

 

Lowell @ wheelhorsepartsandmore has some things also.

 

I need parts for my Panzer tractor. Namely choke and throttle knobs. Kate from HAPCO said he carries the knobs

[JoeM 7,886]

seen this the other day 3 D printing not sure if they do any of what you need.

[WVHillbilly520H 10,376]

12 hours ago, Dennis C. said:

Did Glen Pettit go out of business? I purchased from him over year ago but his email is no longer active. Does he have a phone listing? Thanks

I believe Glenn is recovering from a stroke/illness, and his wife had been taking care of the "business" last I heard but that may have changed since Covid.

[WHX?? 49,924]

Yep I bet covids didn't help his situation any. 

[953 nut 56,755]

10 hours ago, Dennis C. said:

WHX24. I've tried his old email address that is posted on the Vendor list here and it comes back undeliverable.

I've checked with other suppliers I use and they only have his email address, no phone number. I know he was sick before.

I did business with Glen a couple years back at this address.  GlenPettit@iCloud.com

[WHX?? 49,924]

That's the one I was using Dick and got the same response as Dennis . Perhaps if his wife is running the show she does not have (access?) to that addy? 

My next thought was to write a personal letter to that snail mail addy. My 701 resto is dead in the water without a dash. Might be wishful thinking but hoped he would appear at this years BS. 

No matter...  prayers for Glen on his health. 

[953 nut 56,755]

10 minutes ago, WHX24 said:

prayers for Glen on his health.

This is the street address I used.

Glen Pettit

1541 N. Michigan Road  * Eaton Rapids, MI 48827-9225

[Dennis C. 142]

11 hours ago, 953 nut said:

I did business with Glen a couple years back at this address.  GlenPettit@iCloud.com

I emailed to that address too, but no response after 2 weeks.

[cschannuth 3,817]

4 minutes ago, Dennis C. said:

I emailed to that address too, but no response after 2 weeks.

I conversed using this email address with Glen a few weeks ago and I received my parts last week but communication has been hit or miss. I don’t think he’s feeling well yet.

[rmaynard 15,805]

Glen has been active on Facebook recently. You might try looking for him there.

[Dennis C. 142]

43 minutes ago, rmaynard said:

Glen has been active on Facebook recently. You might try looking for him there.

I did, if I found the correct guy, but his newest post was from Dec.2020

[Dennis C. 142]

45 minutes ago, rmaynard said:

Glen has been active on Facebook recently. You might try looking for him there.

Thanks I'll try again

[Dennis C. 142]

On 3/11/2021 at 7:49 AM, cschannuth said:

I conversed using this email address with Glen a few weeks ago and I received my parts last week but communication has been hit or miss. I don’t think he’s feeling well yet.

Thanks, I finally made contact the other day.

[Dennis C. 142]

On 3/10/2021 at 8:29 PM, WHX24 said:

That's the one I was using Dick and got the same response as Dennis . Perhaps if his wife is running the show she does not have (access?) to that addy? 

My next thought was to write a personal letter to that snail mail addy. My 701 resto is dead in the water without a dash. Might be wishful thinking but hoped he would appear at this years BS. 

No matter...  prayers for Glen on his health. 

I made contact with him a couple of days ago. He is still in business. Give him a shout.