Gregor 4,846 #1 Posted March 9, 2021 I have seen discussions about the"grenade" gears in a Kohler. Many guys simply omit them during a rebuild. Does this include the small block (8 HP) as well? Or only the big blocks. I have 2 K181's I will be going through. I would just as soon leave them out if I have a choice. Thanks Greg Share this post Link to post Share on other sites
rmaynard 15,514 #2 Posted March 9, 2021 I'm pretty sure that the balancing gears don't appear in models under 12 HP. 4 Share this post Link to post Share on other sites
Achto 27,605 #3 Posted March 9, 2021 29 minutes ago, Gregor said: I have seen discussions about the"grenade" gears in a Kohler. The "grenade gears" would be the counter balance gears not the ACR. Yes most guys leave them out when a rebuild is done, if they are not timed exact they will cause damage. if left out most people don't notice any difference. 4 Share this post Link to post Share on other sites
Gregor 4,846 #4 Posted March 9, 2021 (edited) Oops I got confused. A little knowledge is a dangerous thing. "sometimes it's better to keep your mouth shut, and have the world think you a fool, than to speak, and remove all doubt" Edited March 9, 2021 by Gregor 2 Share this post Link to post Share on other sites
richmondred01 2,237 #5 Posted March 9, 2021 K181s don’t have balance gears. 2 Share this post Link to post Share on other sites
Achto 27,605 #6 Posted March 9, 2021 1 hour ago, Gregor said: A little knowledge is a dangerous thing. Questions can help us gain knowledge. 4 Share this post Link to post Share on other sites
oldlineman 1,481 #7 Posted March 9, 2021 Abraham Lincoln Share this post Link to post Share on other sites
.jpg.8ca755f0175140fd974a8b033d7f3501.thumb.jpg.71f06ed90f3a14a3b565d8387e418b61.jpg)