haydendavid380 759 #1 Posted March 8, 2021 I surely can't figure it out Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #3 Posted March 8, 2021 See the 2 bars pointing in a "Vee"... This one has been in the family for nearly 40 years. 2 Share this post Link to post Share on other sites
haydendavid380 759 #4 Posted March 9, 2021 Great, so I'm missing pieces Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #5 Posted March 9, 2021 38 minutes ago, haydendavid380 said: Great, so I'm missing pieces Yes , but easy/cheap to fabricate some 3/16-1/4" x 1" flat stock will be plenty. Unfortunately they are in WV and I can't get you actual dimensions until the weekend. 3 Share this post Link to post Share on other sites
Pullstart 62,807 #6 Posted March 9, 2021 I have an old one that was pulled from the junk pile weeds at Grandpa’s house. Lots of broken cast pieces. I tossed a 1/4”x1” piece of bar stock across it, bolted it together as needed and went to town. It was a bit crooked until it broke but it does the job! 1 2 Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #7 Posted March 12, 2021 On 3/8/2021 at 7:20 PM, haydendavid380 said: Great, so I'm missing pieces Better pic... Share this post Link to post Share on other sites
haydendavid380 759 #8 Posted March 12, 2021 20 minutes ago, WVHillbilly520H said: Better pic... That'll be easy enough with a couple pieces of flat stock 1 Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #9 Posted March 12, 2021 1 minute ago, haydendavid380 said: That'll be easy enough with a couple pieces of flat stock I will try to remember to get you some dimensions this weekend when I got back home to WV to my parents. 1 Share this post Link to post Share on other sites
haydendavid380 759 #10 Posted March 12, 2021 Awesome, thanks Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #11 Posted March 14, 2021 Here are the clamps and wedges if you ever need some spars... https://www.ebay.com/itm/Cultivator-Wedge-Bolt-Cuff-Brinly-Sleeve-Hitch-IH-Cub-Cadet-John-Deere-Brinley-/274582581772?_trksid=p2349624.m46890.l49292 Share this post Link to post Share on other sites
haydendavid380 759 #12 Posted March 14, 2021 1 hour ago, WVHillbilly520H said: Here are the clamps and wedges if you ever need some spars... https://www.ebay.com/itm/Cultivator-Wedge-Bolt-Cuff-Brinly-Sleeve-Hitch-IH-Cub-Cadet-John-Deere-Brinley-/274582581772?_trksid=p2349624.m46890.l49292 Thank you 1 Share this post Link to post Share on other sites
