DennisThornton 4,769 #1 Posted March 3, 2021 Got one of these? 9 1 Share this post Link to post Share on other sites
JoeM 7,874 #2 Posted March 3, 2021 5 minutes ago, DennisThornton said: Got one of these? Yep....someone here was selling them a while back. Might still be in classified??? 1 Share this post Link to post Share on other sites
JCM 9,177 #3 Posted March 3, 2021 @dw753 Derek Workman had these for sale, I bought one, works great. 2 Share this post Link to post Share on other sites
Blackhood Bill 721 #4 Posted March 4, 2021 @DennisThornton got two and @dw753 still has them. I have recently seen them on FB. 2 Share this post Link to post Share on other sites
pfrederi 17,741 #5 Posted March 4, 2021 (edited) Save your money. I understand the WH wrenches can bend. Old deck blade hacksaw and a grinder and a bit of time and it will not bend and mine is several years old now. Edited March 4, 2021 by pfrederi 5 1 Share this post Link to post Share on other sites
rjg854 11,387 #6 Posted March 4, 2021 Cordless Impact driver and socket 3 2 Share this post Link to post Share on other sites
953 nut 55,321 #7 Posted March 4, 2021 I took about 1/8" off the side of one of my 1 1/8" open end wrenches years ago, slips right in there. 2 Share this post Link to post Share on other sites
JoeM 7,874 #8 Posted March 4, 2021 Mine is just a wall hanger I used a half inch drive air gun with 6 point socket 4 1 Share this post Link to post Share on other sites
DennisThornton 4,769 #9 Posted March 4, 2021 2 hours ago, pfrederi said: Save your money. I understand the WH wrenches can bend. Old deck blade hacksaw and a grinder and a bit of time and it will not bend and mine is several years old now. Been wondering why I've kept so many used blades! Man! That should work alright! 1 1 Share this post Link to post Share on other sites
squonk 41,155 #10 Posted March 4, 2021 (edited) 11 hours ago, rjg854 said: Cordless Impact driver and socket IR 231 for the stubborn ones! Edited March 4, 2021 by squonk 3 Share this post Link to post Share on other sites
lynnmor 7,308 #11 Posted March 4, 2021 I have one that I bought with a new tractor many years ago, is spread open the first time I used it. I think they are made out of peanut butter. Get a cheap wrench at a flea market or yard sale and if it is too thick, grind it down. 3 Share this post Link to post Share on other sites
DennisThornton 4,769 #12 Posted March 4, 2021 28 minutes ago, lynnmor said: I have one that I bought with a new tractor many years ago, is spread open the first time I used it. I think they are made out of peanut butter. Get a cheap wrench at a flea market or yard sale and if it is too thick, grind it down. No kidding! Wheel Horse put their name on a mediocre tool? Why bother? Share this post Link to post Share on other sites
Pullstart 62,912 #13 Posted March 4, 2021 What are we using these for? Why do they need to be skinny? I’ve taken a liking to Forged In Fire. If I ever make my own Damascus blade, it’ll be out of either leaf springs or mower blades, or both! 1 Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #14 Posted March 4, 2021 3 minutes ago, pullstart said: What are we using these for? Why do they need to be skinny? I’ve taken a liking to Forged In Fire. If I ever make my own Damascus blade, it’ll be out of either leaf springs or mower blades, or both! For the mower blade spindles nuts, the thinner ones go between the blade and "top" nut to hold it while removing/installing the blade retention nut. 3 1 Share this post Link to post Share on other sites
Pullstart 62,912 #15 Posted March 4, 2021 3 minutes ago, WVHillbilly520H said: For the mower blade spindles nuts, the thinner ones go between the blade and "top" nut to hold it while removing/installing the blade retention nut. Shows how often I change blades I did just get a set sharpened and balanced for my Xi deck 1 Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #16 Posted March 4, 2021 1 hour ago, pullstart said: Shows how often I change blades I did just get a set sharpened and balanced for my Xi deck Don't feel bad I never used an open end wrench, just a block of wood to stop the blade and box end wrench and a rubber mallet to loosen or tighten the blade nuts before acquiring an impact "gun" wrench. 2 1 Share this post Link to post Share on other sites
squonk 41,155 #17 Posted March 4, 2021 3 hours ago, pullstart said: Shows how often I change blades I did just get a set sharpened and balanced for my Xi deck You mow? 2 Share this post Link to post Share on other sites
squonk 41,155 #18 Posted March 4, 2021 I love the smell of dead grass burning in the morning! 1 Share this post Link to post Share on other sites
Pullstart 62,912 #19 Posted March 4, 2021 (edited) 11 minutes ago, squonk said: You mow? Sometimes... but with a ZTR Scag. That zero turn, many people might call a throw away. I got a commercial powder coated tough version. Mrs. P told me in 2018 just before the Big Show “You go get a new zero turn mower [and keep my big front yard mowed], and you can have as many Wheel Horses as you want. Well, we know how that turned out! Edited March 4, 2021 by pullstart And for the rest of the story 1 1 1 Share this post Link to post Share on other sites
Racinbob 11,094 #20 Posted March 4, 2021 Years ago I had a friend mill an open end wrench down to fit. Being 16-18" long they make it quick and easy work 1 Share this post Link to post Share on other sites
Kligan 2 #21 Posted April 7, 2021 I had 2 of those, but I just sold one of them. Have you not found anything on Facebook? People usually post a lot of stuff there to sell. I posted mine many times! Not everytime I had succes selling it, but my point is people are often searching on FB as there are much lower prices. I sold mine for almost nothing compared to how much I spent on it, honestly. But I'm glad to help others if I can, so no worries. Maybe you'll find what you need at a decent price. Share this post Link to post Share on other sites
seuadr 488 #22 Posted May 10, 2021 On 4/7/2021 at 3:34 AM, Kligan said: I had 2 of those, but I just sold one of them. Have you not found anything on Facebook? People usually post a lot of stuff there to sell. I posted mine many times! Not everytime I had succes selling it, but my point is people are often searching on FB as there are much lower prices. I sold mine for almost nothing compared to how much I spent on it, honestly. But I'm glad to help others if I can, so no worries. Maybe you'll find what you need at a decent price. alright man, i gotta know - are you a bot or just promoting the blog for someone? if you are not a human - i'm super impressed. Share this post Link to post Share on other sites
