Bow_Extreme 544 #1 Posted February 28, 2021 Question. A friend of mine has the 50” grader blade(79351). He has a 314-8 tractor. When he places the link onto the upper rock shaft hole, at full lift position, the blade will barely come off the ground. The link is basically the solid link, about 11-3/4” total length and 10-3/4” pin to pin. Anyone else had issues with lifting the blade? I’m not anywhere near close to him so I can’t directly put my eyes on this and trouble shoot his issues. Share this post Link to post Share on other sites
Pullstart 62,807 #2 Posted February 28, 2021 Maybe a shorter link is needed? I’d lock it in full lift, then lift the blade to the frame, then measure the hole to hole distance for comparison... 1 Share this post Link to post Share on other sites
Bow_Extreme 544 #3 Posted February 28, 2021 1 hour ago, pullstart said: Maybe a shorter link is needed? I’d lock it in full lift, then lift the blade to the frame, then measure the hole to hole distance for comparison... Kevin, Thank You. I had exactly the same thoughts. I did step him through all of the instructions and pictures. I believe he has now successfully made this work. I think he tried using the wrong rock shaft tab. Thank You!! 2 Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #4 Posted February 28, 2021 The mid grader blade has 2 style of lift links .http://x65.d8d.myftpupload.com/product/toro-wheel-horse-5678-mid-mount-grader-blade-lift-linkage/ http://x65.d8d.myftpupload.com/product/toro-wheel-horse-92-0983-50-grader-blade-lift-linkage/ 1 Share this post Link to post Share on other sites
