Throttle Plate Screws

[Achto 27,605]

I'm doing some major surgery on a K model Kohler carb. In the process I managed to break a couple of screws for the throttle & choke plate. I forgot to bring one of them to work with me & would like to grab some new ones on the way home.

 

Just wondering if anyone knew what size they should be??

 

Thanks

[AMC RULES 37,130]

Closest I found were 4-40, used blue Loctite, and retapped the holes. 

[ebinmaine 67,627]

Could be a 3 - 48 x 3/16

[ebinmaine 67,627]

I've ordered them from KL Jack. Regular hardware stores don't have them around here. 

[Achto 27,605]

3 minutes ago, ebinmaine said:

Regular hardware stores don't have them around here.

 

The local Ace has an assortment of gun hardware. I'll check to see if they have any thing in a 3-48. 

 

If not I will grab some 4-40's, @AMC RULES suggestion would be a good route also.

 

Thanks guys!!

[squonk 41,155]

I'm pretty sure the majority of the carbs are 4-40. A few have the 3-48's

[squonk 41,155]

ok I was wrong. 3-48 X 1/4" for stock Kohler shafts  on Carter and Kohler  # 26,28 & 30 carbs. 4-40 used on Walboro and can be used on Kolher carbs if the 3-48 strips out and you need to go over size.

 

http://gardentractorpullingtips.com/a1carb.htm

[rjg854 11,387]

17 minutes ago, squonk said:

ok I was wrong. 

I can't believe you of all people would make a mistake like that 

 

 

[ebinmaine 67,627]

1 hour ago, Achto said:

 

The local Ace has an assortment of gun hardware. I'll check to see if they have any thing in a 3-48. 

 

If not I will grab some 4-40's, @AMC RULES suggestion would be a good route also.

 

Thanks guys!!

Hey Dan.

Make sure you do NOT get them in an Allen head. Get phillips head or even flat if you have to.  I wasn't super happy with the ability to tighten Allen heads.

[squonk 41,155]

17 minutes ago, rjg854 said:

I can't believe you of all people would make a mistake like that 

 

 

It's hell to get old plus I'm dealing with the aftershock of my first Covid shot! 

[rjg854 11,387]

3 minutes ago, squonk said:

It's hell to get old plus I'm dealing with the aftershock of my first Covid shot! 

Lucky you to get a shot, it's like try to strike gold to be able to get an appointment.  All in due time I suppose.

[Ed Kennell 38,227]

1 hour ago, squonk said:

ok I was wrong.

 

OK., I'll log this in my family bible under significant events.  

[squonk 41,155]

It takes a "Big Man" to admit he was wrong! 

[Mickwhitt 4,642]

I re tapped mine at M 2.5 and used brass screws with loctite.

 

Usual practice is to peen over the ends to stop them vibrating loose.

 

Mick 

 

 

[WHX?? 48,828]

Might have the taps Dan if you need and I can find them! 

[Achto 27,605]

12 minutes ago, WHX24 said:

Might have the taps Dan if you need and I can find them!

 

Tap should be a non-issue, should have a 4-40 in my set. Thanks!!

[squonk 41,155]

16 minutes ago, WHX24 said:

Might have the taps Dan if you need and I can find them! 

Look in the shed under the flower pots! 

[WHX?? 48,828]

Smart @$$ ! 

[stevasaurus 22,764]

Silly question...Where do you keep taps??  Right by the beer, of course.  

[Pullstart 62,912]

5 hours ago, squonk said:

It takes a "Big Man" to admit he was wrong! 

I’m wrong all the time!  Now you callin’ me fat?  

[stevasaurus 22,764]

I'm thinking short and stocky.    

[squonk 41,155]

1 hour ago, stevasaurus said:

I'm thinking short and stocky.    

The Boy from Ipanema!