Dkphillips 22 #1 Posted February 17, 2021 Today while pushing snow my C145 would stop moving. Then when I would operate the hydro lever it would move a little while then quit again. I’ve never had this problem. Transmission oil is perfect. Any ideas? Share this post Link to post Share on other sites
pfrederi 17,866 #2 Posted February 17, 2021 Put a magic marker mark on each hub and axle. Then try driving it. Do either one slip. Could have sheared axle key. if it passes then check the input shaft for the hydro vs eh pulley any slippage there?? 4 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,095 #3 Posted February 17, 2021 Any chance you were backing up into deep snow? Snow will get to the transmission pulley/belt and cause the belt to slip. Takes 1/2 a minute for the belt to regain traction. Garry 4 1 Share this post Link to post Share on other sites
