76c12091520h 3,608 #126 Posted June 8, 2021 I have available a set of 4 plastic wheel weights that will fit 12" and 8" rims. The 12" inch rears are brand new, never installed , and come with mounting hardware. The 8" fronts (excellent used) are other brand name weights but will fit the 8" front rims (not later 520's) and have had matching Wheel Horse decals installed. $200.00 for the set of 4 . Share this post Link to post Share on other sites
Pullstart 62,829 #127 Posted June 9, 2021 WANTED A good used choke cable for an 857. We’ve had the original soaking in diesel for 2 years and it’s still locked up solid. Time to look for a replacement.... though Jada is pretty good at finding the choke lever under the hood and getting it fired up! @Ed Kennell, got anything in a bucket? Share this post Link to post Share on other sites
Ed Kennell 38,112 #128 Posted June 9, 2021 5 minutes ago, pullstart said: got anything in a bucket? I have choke cables Kev, but not sure what they fit. I'll check tomorrow.....should be the same as my 855 cable. 1 Share this post Link to post Share on other sites
Pullstart 62,829 #129 Posted June 9, 2021 16 minutes ago, Ed Kennell said: I have choke cables Kev, but not sure what they fit. I'll check tomorrow.....should be the same as my 855 cable. The “D” hole in the dash is about 1/2” wide and the knob is about 1-1/4” diameter. I’ve managed to know it’s whereabouts for 2 years but now that I want to measure it’s length it grew legs! 3 Share this post Link to post Share on other sites
Achto 27,562 #130 Posted June 9, 2021 7 hours ago, pullstart said: The “D” hole in the dash is about 1/2” wide and the knob is about 1-1/4” diameter. If you can't find a used one here is a source for new. http://www.psep.biz/store/toro_mower_cables.htm 2 Share this post Link to post Share on other sites
Ed Kennell 38,112 #131 Posted June 9, 2021 Here is the one on my 855. These will be coming to the show. 2 1 Share this post Link to post Share on other sites
953 nut 55,155 #132 Posted June 9, 2021 9 hours ago, pullstart said: We’ve had the original soaking in diesel for 2 years and it’s still locked up solid. If you can find the runaway cable again try soaking it in vinegar for a couple days to free up the rust then put it in the diesel or just buy one of Ed's. 2 Share this post Link to post Share on other sites
Pullstart 62,829 #133 Posted June 9, 2021 @Ed Kennell put me down for the one with the dish shaped concave knob (middle). I’m sure Jada will appreciate having all dash controls for the first time ever! 1 Share this post Link to post Share on other sites
Pullstart 62,829 #134 Posted June 9, 2021 I have this 42” snow plow in the classifieds, but figured I’d toss it up here. It was on my 1056. Asking $150. Price drop to $100 even for the Big Show only. I don’t plan to haul it to the show unless a commitment is made before. 1 Share this post Link to post Share on other sites
RJ Hamner 1,007 #135 Posted June 9, 2021 I have what is left of a 1969 charger 12 but what it does have left is a pretty good hydro I can put it on the trailer if someone wants it for $50 Share this post Link to post Share on other sites
Ed Kennell 38,112 #136 Posted June 9, 2021 Getting down to the Show crunch time, so I dumped a few buckets to see what we have. If you see anything of interest, shoot me a PM and we can negotiate. I will leave these out for a few days, then put them back and dump the next series of buckets. 1 2 Share this post Link to post Share on other sites
squonk 41,050 #137 Posted June 9, 2021 (edited) Mid mount grader blade 40" With lift link! $275. SOLD!!!!!!!!!!!!!!!!!! Edited June 9, 2021 by squonk 2 Share this post Link to post Share on other sites
squonk 41,050 #138 Posted June 9, 2021 (edited) ISO........... LOOKING FOR! Newer style mid Tach o Matic hitch. I need this style! I cannot use the older style that the lever hangs down. Must look like this! ALSO: Looking for a pair of rear wheels for the 6" X 12" Tires. BOTH FOUND!!!!!! Edited June 12, 2021 by squonk 1 Share this post Link to post Share on other sites
Lane Ranger 10,968 #139 Posted June 9, 2021 I have the rear wheels Squonk! I want the mid grader blade! Share this post Link to post Share on other sites
squonk 41,050 #141 Posted June 9, 2021 On 5/18/2021 at 10:07 PM, 76c12091520h said: Brand new metal Tecumseh service sign, still in the protective wrapper, never hung, measures 3ft x 2ft : $50.00 I'll take that sign if still available! Share this post Link to post Share on other sites
Handy Don 12,201 #142 Posted June 9, 2021 I have a 400 hr 1988 518-H that was a donor tractor for my "Clyde" project the rest of which I will not be using. What you see is what you get except that it can come with the clean rear fender, steering shaft, and clean steering wheel that are not shown here. I'll bring it to the show only if someone has committed to taking it -- price will be very low , maybe a couple of burgers, fries, and drinks? Otherwise, it'll become scrap. PM me with any specific questions. Coming to me it had been stored outside under tarps for years so the tires are very aged. 8" front wheels but the rears are are from a C-series (8.5" not the 10.5" that were original to it). Eaton 700 was working and seemed strong (it spun the rear tires when the front wheels were up against a stone wall) for the little bit of driving I did before I parked it to take the engine, hoodstand, dash, other stuff to transfer to another chassis. 1 Share this post Link to post Share on other sites
19richie66 17,500 #143 Posted June 9, 2021 (edited) 16 minutes ago, Handy Don said: I have a 400 hr 1988 518-H that was a donor tractor for my "Clyde" project the rest of which I will not be using. What you see is what you get except that it can come with the clean rear fender, steering shaft, and clean steering wheel that are not shown here. I'll bring it to the show only if someone has committed to taking it -- price will be very low , maybe a couple of burgers, fries, and drinks? Otherwise, it'll become scrap. PM me with any specific questions. Coming to me it had been stored outside under tarps for years so the tires are very aged. 8" front wheels but the rears are are from a C-series (8.5" not the 10.5" that were original to it). Eaton 700 was working and seemed strong (it spun the rear tires when the front wheels were up against a stone wall) for the little bit of driving I did before I parked it to take the engine, hoodstand, dash, other stuff to transfer to another chassis. @wallfish here are some donor parts ? Edited June 9, 2021 by 19richie66 1 1 Share this post Link to post Share on other sites
76c12091520h 3,608 #144 Posted June 10, 2021 (edited) 4 hours ago, squonk said: I'll take that sign if still available! Consider it yours ! Look us up in vendors section, but just in case shoot me a PM with your cell # Edited June 10, 2021 by 76c12091520h Share this post Link to post Share on other sites
squonk 41,050 #145 Posted June 10, 2021 My phone won't work there but I'll find you. Share this post Link to post Share on other sites
Achto 27,562 #146 Posted June 10, 2021 Looking for a Sector and Channel for a dozer blade. Part number 5102 Share this post Link to post Share on other sites
squonk 41,050 #147 Posted June 10, 2021 31 minutes ago, Achto said: Looking for a Sector and Channel for a dozer blade. Part number 5102 Dan is that a 3 hole sector? Share this post Link to post Share on other sites
Achto 27,562 #148 Posted June 10, 2021 7 minutes ago, squonk said: Dan is that a 3 hole sector? Yes Share this post Link to post Share on other sites
squonk 41,050 #149 Posted June 10, 2021 8 minutes ago, Achto said: Yes I have that piece. I get it out of my loft and take a pic 1 Share this post Link to post Share on other sites
squonk 41,050 #150 Posted June 10, 2021 Is this it? 1 Share this post Link to post Share on other sites
