Big show buy, sell and trade

[stevebo-(Moderator) 8,332]

This one is up for sale.. 

Nice clean original patina 857 as shown. 
1400 as shown or 1000 without wheel weights. 

[Wheel Horse 3D 3,795]

Have some free printer time...what would ya'll like me to print up to bring with? Hate to waste printer time guessin what folks may require lol.

So let me know what peaks your interest!

Edited April 30, 2021 by Wheel Horse 3D

[76c12091520h 3,624]

 Correct replacement seat assemblies with metal pans and the 7" x 7 1/2"  Wheel Horse specific bolt pattern. $60.00 .

Private message me to reserve one.  This is SHOW ONLY / CASH ON DELIVERY PRICING. We are not shipping these at this time.

Edited May 4, 2021 by 76c12091520h
Clarify pricing

[Greentored 3,216]

On 5/2/2021 at 1:10 AM, 76c12091520h said:

 Correct replacement seat assemblies with metal pans and the 7" x 7 1/2"  Wheel Horse specific bolt pattern. $60.00 .

Private message me to reserve one. 

 

 

 

 

YES!  Glad somebody finally dug up and sourced these, and offering them for a VERY fair price!

[Greentored 3,216]

I wouldn't mind finding a 520 front axle and spindles, preferably swepped but not completely necessary, if somebody has one they just have to unload.

  Wear is not a concern, id rather have one thats beat up with a price reflective of it.

[WHX?? 48,845]

I have one Green @Greentored swept but spindle holes a bit wobbled out. Did you need the tie rods I think those got robbed off her. Trade ya for one of those seats K & B has. 

[76c12091520h 3,624]

 Agri-Fab disc cultivator # 45-02662 ; brand new in the box $200.00  ;   Current retail is $250.00 and up.

[Greentored 3,216]

17 hours ago, WHX24 said:

I have one Green @Greentored swept but spindle holes a bit wobbled out. Did you need the tie rods I think those got robbed off her. Trade ya for one of those seats K & B has. 

PM incoming

[ACman 7,618]

On 5/2/2021 at 1:10 AM, 76c12091520h said:

 Correct replacement seat assemblies with metal pans and the 7" x 7 1/2"  Wheel Horse specific bolt pattern. $60.00 .

Private message me to reserve one.  This is SHOW ONLY / CASH ON DELIVERY PRICING. We are not shipping these at this time.

When is the cut off date to place a order ? Thanks @ACman 

[76c12091520h 3,624]

1 hour ago, ACman said:

When is the cut off date to place a order ? Thanks @ACman 

Until I run out. 

[76c12091520h 3,624]

 Pair of  20 x 10.00 x 8 Lug tires; these tires are 2 DIFFERENT BRANDS but match up nearly perfectly. 1 is a Carlisle, 1 is a WDT. Both are in very nice condition with very little (if any) wear and were holding air when I removed them from the wheels, they also showed no noticeable difference in height or width when inflated. $80.00 obo/ PM me if interested. 

Edited May 10, 2021 by 76c12091520h
Added obo

[Jrblanke 857]

Hey guys, I'm looking for some front wheels/tires for my 876. Nothing fancy. Just some that hold air and are the original tall/skinny size. Obviously, would be looking to pick up at the BIG show. 

 

James

[squonk 41,169]

2 hours ago, Jrblanke said:

Hey guys, I'm looking for some front wheels/tires for my 876. Nothing fancy. Just some that hold air and are the original tall/skinny size. Obviously, would be looking to pick up at the BIG show. 

 

James

James, are you talkin the sawtooth thread style? 

[Jrblanke 857]

2 hours ago, squonk said:

James, are you talkin the sawtooth thread style? 

Mike,

I think so? If you look on the first page of this thread at the picture Pullstart posted of the tractor sticking out of the bed of the blue truck. Those front tires are what I am calling the original style for my 876. 

 

Everyone else,

Howard, 857 horse, says he needs a gas tank for an 857. 

 

James

[squonk 41,169]

7 minutes ago, Jrblanke said:

Mike,

I think so? If you look on the first page of this thread at the picture Pullstart posted of the tractor sticking out of the bed of the blue truck. Those front tires are what I am calling the original style for my 876. 

 

Everyone else,

Howard, 857 horse, says he needs a gas tank for an 857. 

 

James

There is a slight possibility that I'll  have 2 of those tires/ wheels.I'll let you know.

[squonk 41,169]

We're having a run on Hydrogear cooling fans here behind "the curtain!" I'm picking up 2 of these fans at the show but I need a 3rd. If anybody's got one kicking around. 

 

 

Found!!! Thanks again!

Edited May 14, 2021 by squonk

[Wheel Horse 3D 3,795]

Workin on gettin 3 or 4 full hitching posts assembled for the Show! Normally we would't ship anything other than the topper, but at the Big Show well have a few different ones with different bases and finishes. This is an example of an easy DIY post and base for one of the toppers consisting of some 2inch PVC and fittings, and a 4 on 4 rim.

Edited May 16, 2021 by Wheel Horse 3D

[Sparky-(Admin) 21,350]

  I posted in the wanted section of our classified section...but should probably add it here since I’ll be at the WH Show.

  Looking for a 308-8 in decent shape, no project machines. Doesn’t need to have any attachments. 

[squonk 41,169]

Odd-Ball 3/4 bearings for the flat mule drive pulley that has replaceable bearings. Also fits deck spindle  bearings on SD and RD 42" Decks $5.00 Ea. I have 8 available.

 

Edited May 18, 2021 by squonk

[bigcreek 205]

Working prepping for the Big Show, bringing two tractors for sale. Photos to come. 

 

1996 314H, three owner barn find, with only 93 original hours. 42 RD deck and Plow. 

 

1973 No Name 10 - restored, No deck

 

1986 Snow Thrower - all there, like new 

 

Update: This 314-H actually has 97 hours on it, I was off by four. Both are being cleaned and serviced. 

 

Edited May 30, 2021 by bigcreek
Images added 1986 314-H and 1973 No Name

[Jrblanke 857]

2 hours ago, bigcreek said:

Working prepping for the Big Show, bringing two tractors for sale. Photos to come. 

 

1996 314H, three owner barn find, with only 93 original hours. 42 RD deck and Plow. 

 

1973 No Name 10 - restored, No deck

 

1986 Snow Thrower - all there, like new 

 

 

 

93 hours...say whaaaaat?

[tunahead72 2,424]

Really, can't wait to see the photos...  Hint, hint. 

 

[76c12091520h 3,624]

 Brand new metal Tecumseh service sign, still in the protective wrapper, never hung, measures 3ft x 2ft :  SOLD!

Edited June 10, 2021 by 76c12091520h

[76c12091520h 3,624]

 Locking differential assy, 1 1/8" axles, one measures 12" the other 11 1/4", clean and in good usable condition : $75.00 

[76c12091520h 3,624]

 I have available an original Wheel Horse seat pan with a NOS aftermarket replacement cover. Cover was sealed in a bag and is soft and pliable, seat pan was blasted and refinished in the proper satin black finish. Bolt pattern is 7" x 7 1/2" . THIS IS A SMALL SEAT, NOT CORRECT FOR C-SERIES,RAIDERS, 300'S ETC. SOLD/SOLD/SOLD

Edited May 27, 2021 by 76c12091520h
SOLD