Big show buy, sell and trade

[Greentored 3,201]

Things are looking REAL sketchy for me right now, its real disappointing. @WHX24 you have a front end for me, and Im in the process of taking care of that seat payment in trade so you can just pick it up there.

Might need to call on someone traveling the southeast and see if I can get that front end hauled.

[Jrblanke 857]

10 minutes ago, Greentored said:

Things are looking REAL sketchy for me right now, its real disappointing. @WHX24 you have a front end for me, and Im in the process of taking care of that seat payment in trade so you can just pick it up there.

Might need to call on someone traveling the southeast and see if I can get that front end hauled.

 

 

Greentored,

I live in Raleigh and am in Greensboro on a pretty regular basis. I can probably get your stuff hauled back down here to at least Raleigh. What is it exactly and how big is it? I do not have indoor storage, so it would have to stay outside until you pick it up. I hope you can come to the show. I will be hanging out in Howard's tent, Jay in NC's tent, or Wallfish's tent. 

 

James 

 

 

[WHX?? 48,810]

@Greentored @JrblankeI'll PM you guys... see if we can't work something out 

Crapola turn on your PM James! 

Its a complete 520 swept front end James, with tires & rims. You guys see if you can connect. I am not gonna have the room to haul it out there and back. I'm already overloaded for the trip back.  It's a shame Green you can't make it was lookin forward to havin a beer with ya. 

Edited June 17, 2021 by WHX24

[elcamino/wheelhorse 9,297]

On 6/14/2021 at 9:51 PM, 76c12091520h said:

 101335 "dd" blade sets. Have 3 sets available: $50.00 per set. Fits most 1971 thru 1979 36" side and rear discharge decks. Many other blade sets available (NO 100202's/ don't ask) . Only bringing blade sets if they are pre-sold. Let me know what you're looking for.

@76c12091520h, can you set aside a set for me , sorry you will have to ship them . Let me know shipping costs and I will mail the money to you. Thanks Jim Winder

[Ed Kennell 38,103]

28 minutes ago, elcamino/wheelhorse said:

h, can you set aside a set for me , sorry you will have to ship them . Let me know shipping costs and I will mail the money to you. Thanks Jim Winde

Maybe Mark could bring them with your DD pulleys Jim.

[squonk 41,049]

25 minutes ago, Ed Kennell said:

Maybe Mark could bring them with your DD pulleys Jim.

I will have to get them to Mark. I'm already getting a Tecky sign from KB so I can grab those blades.

[squonk 41,049]

1 hour ago, Jrblanke said:

 

 

Greentored,

I will be hanging out in Howard's tent, Jay in NC's tent, or Wallfish's tent. 

 

James 

 

 

Yeah right! You'll be hanging out in the pie line! 

[richmondred01 2,237]

13 minutes ago, squonk said:

I will have to get them to Mark. I'm already getting a Tecky sign from KB so I can grab those blades.

if you get them to me I will get them to Jim. 

[elcamino/wheelhorse 9,297]

@76c12091520h , @Ed Kennell, @richmondred01, and @squonk If Brian is ok with me sending him money  and if he trusts Skunky that would be a great idea. Thanks Ed for the suggestion. Mark it looks like you will be the transfer point for central Virginia . LOL

[squonk 41,049]

Don't send him any Play-Doh money Waldo! 

[19richie66 17,500]

3 hours ago, Greentored said:

Things are looking REAL sketchy for me right now, its real disappointing. @WHX24 you have a front end for me, and Im in the process of taking care of that seat payment in trade so you can just pick it up there.

Might need to call on someone traveling the southeast and see if I can get that front end hauled.

I’ll have my enclosed trailer so if you run out of options, I can get it back to my place and it can sit in the trailer till it can make it’s way to you. It wouldn’t be outside and I promise I won’t install it on any of my tractors   Although Raleigh is closer to you. 

Edited June 17, 2021 by 19richie66

[elcamino/wheelhorse 9,297]

44 minutes ago, squonk said:

Don't send him any Play-Doh money Waldo! 

I would have to steal the Play- Doh money from my grand daughters and they are at the House the Mouse build. I would have to pay them any way , they don't accept anything less than a ten for a tooth . he he

[Jrblanke 857]

1 hour ago, 19richie66 said:

I’ll have my enclosed trailer so if you run out of options, I can get it back to my place and it can sit in the trailer till it can make it’s way to you. It wouldn’t be outside and I promise I won’t install it on any of my tractors   Although Raleigh is closer to you. 

 

I thought you were in Florida? You moving around with the witness protection program or something? Is Richie your real name? Are you a spy?

[Jrblanke 857]

3 hours ago, squonk said:

Yeah right! You'll be hanging out in the pie line! 

 

Fingers crossed they will have copious amounts of pie! That stuff is slap yo momma good!

 

 

[19richie66 17,500]

1 hour ago, Jrblanke said:

 

I thought you were in Florida? You moving around with the witness protection program or something? Is Richie your real name? Are you a spy?

Finally made it to North Carolina. Been here since last Sept. I’m now 600 miles closer to the show

[76c12091520h 3,608]

 9819 "dd " blade sets, fits many 36" rear discharge decks, late 60's thru mid 70's, $45.00 per set, several available. Let me know if interested. Many more part #'s available. 

[Pullstart 62,827]

On 6/16/2021 at 9:40 AM, pullstart said:

GT14 parts lot... $100

 

here’s the classifieds link for details

 

 

@buckrancher is that plate in these pictures?  Make an offer...

 

*edit I don’t see what I think you need... but have a look anyway*
 

Edited June 18, 2021 by pullstart

[stevebo-(Moderator) 8,330]

Ok after going through some items here is what I am gonna bring. If you are interested in these please pm me. Prices are obo as I would like to move these along. 
 

Round hood $20 SOLD to 702 Timmy

 

Deck spindle nos ? Not sure what it fits. Part number is 700490

 

Power bagger set up looks complete less mount to the machine which I may have. Came with an xi but I am positive it is same as 300-500 series. The power vac is a little beat up and will need bearings $200

300 series bagger parts (not complete but what is there) $50

Cast front wheel weights $75 -SOLD to Obone

 

Wheelhorse pull behind grass seeder/spreader like new used only a few times $120

 

Rear 12” tires in good condition $50 tires sold to rapaso 

 

Reproduction oem hydro foot control set up complete. Might be missing some hardware?  $200 -SOLD to Cafoose

 

[JoeM 7,871]

I have a couple more item for the show.

 

Rear 7 inch wide WH wheels. $40

 

Rear Sleeve Hitch Blade.....good condition. $80 Taken WHX24

Edited June 19, 2021 by JoeM

[cafoose 3,354]

15 hours ago, stevebo said:

Reproduction oem hydro foot control set up complete. Might be missing some hardware?  $200

@stevebo I'll take the foot control!

[WHX?? 48,810]

I'll take the blade @JoeM

[stevebo-(Moderator) 8,330]

A few more items up fir sale!

 

spike aerator $160

 

60” deck spindle in good shape no longer available via toro $80

toro part number 111013

[76c12091520h 3,608]

 109078 Blade kit, 32" side, 2 sets available, $25.00/set . Genuine Toro/W.Horse, not aftermarket

[Lane Ranger 10,967]

Bringing to the Big Show For Sale

 

New Old Stock 32 inch gear driven mower deck spindle plate .  $30

 

Two good 953/1054 wheels  $50 

 

I also have some rear hitches for snowplows.  Older 953/1054 type hitch $40 and newer 300/400 hitch $45.

Edited June 20, 2021 by Lane Ranger

[rjg854 11,356]

Just on the off chance, does someone have a roached out round or square hood, I could use as yard art?