daveoman1966 3,747 #1 Posted February 7, 2021 (edited) This older Hydraulic Clyinder #6618...used 'til mid 70s...is notorious for developing a leak and making a mess. Here is my 'easy fix' to stop the drip drip drip... If it later on begins to leak again, just replace the O-ring under the Copper washer. This is the fix I used on both my Bronco 14 and the C-160 Auto a couple of years ago and neither one leaks today. Edited February 7, 2021 by daveoman1966 pic 2 7 Share this post Link to post Share on other sites
ebinmaine 67,388 #2 Posted February 7, 2021 An excellent idea Dave and thanks for posting. My own Charger cylinder does seap a tad so I may very well put this to use. 1 Share this post Link to post Share on other sites
pfrederi 17,696 #3 Posted February 7, 2021 (edited) I think this should be pinned in transmission or given a spot in Instructional threads. This is great info!!! Edited February 7, 2021 by pfrederi 3 1 1 Share this post Link to post Share on other sites
ebinmaine 67,388 #4 Posted February 7, 2021 17 minutes ago, pfrederi said: I think this should be pinned in transmission or given a spot in Instructional threads. This is great info!!! Agreed Share this post Link to post Share on other sites
daveoman1966 3,747 #5 Posted February 7, 2021 ATTN: MODERATOR(S)... put this post in any forum page/slot of YOUR choosing. It is out there for ANYONE to use. 1 1 1 Share this post Link to post Share on other sites
