roadapples 6,983 #1 Posted February 2, 2021 How important is the fan on an Eaton 1100 this time of year? Tire chain caught mine... 2 Share this post Link to post Share on other sites
JAinVA 4,620 #2 Posted February 2, 2021 (edited) I have a couple that were covered so completely with oil, dirt and leaf debris that i can't imagine that much air ever got to the cooling fins. I would think that with cold air temps you should be okay but that's just my opinion. Edited February 2, 2021 by JAinVA 3 Share this post Link to post Share on other sites
953 nut 55,767 #3 Posted February 3, 2021 Shouldn't be a big deal so long as you aren't working it too hard. Mike @squonk has an inexpensive part number I think. 2 Share this post Link to post Share on other sites
Darb1964 1,055 #4 Posted February 3, 2021 Pack the trans with snow. 2 Share this post Link to post Share on other sites
WHX?? 49,155 #5 Posted February 3, 2021 I'm with JA, I checked mine after an hour of snow work and was warm but not even close to being hot. You can easily hold on to the filter. 90 deg in the shade mowing might be a different story. I got a couple you need one 'Apples. 1 1 Share this post Link to post Share on other sites
roadapples 6,983 #6 Posted February 3, 2021 I'm gonna be looking for one... Share this post Link to post Share on other sites
Ed Kennell 38,634 #7 Posted February 3, 2021 Whew, Sure glad I reread the title Tranny Fan. I thought Jay was looking for a Fanny Fan. 10 Share this post Link to post Share on other sites
WHX?? 49,155 #8 Posted February 3, 2021 8 minutes ago, Ed Kennell said: Whew, Sure glad I reread the title Tranny Fan. I thought Jay was looking for a Fanny Fan. PM me yer addy Jay I'll send you one. 2 2 Share this post Link to post Share on other sites
tom2p 2,394 #9 Posted February 3, 2021 new fan cost around $20-25 - and takes minutes to install new Eaton 1100 trans possibly around $2K ? - maybe $200-1K for a good used one ? - and requires hours to install 1 Share this post Link to post Share on other sites
roadapples 6,983 #10 Posted February 3, 2021 Thanks Tom, Jim's got me covered... 1 Share this post Link to post Share on other sites
squonk 41,321 #11 Posted February 3, 2021 13 hours ago, Ed Kennell said: Whew, Sure glad I reread the title Tranny Fan. I thought Jay was looking for a Fanny Fan. Lotta ways to go with this thread! 1 Share this post Link to post Share on other sites
squonk 41,321 #12 Posted February 3, 2021 14 hours ago, 953 nut said: Shouldn't be a big deal so long as you aren't working it too hard. Mike @squonk has an inexpensive part number I think. Wal -Mart doesn't have any box fans on the floor at the moment! 2 Share this post Link to post Share on other sites
pacer 3,174 #13 Posted February 3, 2021 (edited) Squonk's crack about walmart fan is possible-- I had a .... C175 (i think!) anyhow, the fan was bad and I remembered I had an old 12v dash fan from an old truck. Dug it out and though, Hmmmm that just might work. Sure enough, I bored the center out to the shaft diameter and ,,, it was a beautiful thing!! Edited February 3, 2021 by pacer 4 Share this post Link to post Share on other sites
lynnmor 7,353 #14 Posted February 3, 2021 I had a fan just slipping while mowing in the hot summer, it really did overheat. I would keep it operating all the time. When installing, you can't make it real tight because it is plastic, so use thread locker on the bolt. 3 Share this post Link to post Share on other sites
pacer 3,174 #15 Posted February 3, 2021 (edited) 3 minutes ago, pacer said: Squonk's crack about walmart fan is possible-- I had a .... C175 (i think!) anyhow, the fan was bad and I remembered I had an old 12v dash fan from an old truck. Dug it out and though, Hmmmm that just might work. Sure enough, I bored the center out of the blades to the shaft diameter and ,,, it was a beautiful thing!! Edited February 3, 2021 by pacer trtrying to correct a misspell and made 2 post .... DUH! Share this post Link to post Share on other sites
AMC RULES 37,134 #16 Posted February 3, 2021 I, for one... am not one. 1 Share this post Link to post Share on other sites
WHX?? 49,155 #17 Posted February 3, 2021 5 minutes ago, AMC RULES said: I, for one... am not one. Odd enough for a guy that goes by Madge..... Share this post Link to post Share on other sites
AMC RULES 37,134 #18 Posted February 3, 2021 C'mon, you're the one always crying about your dry, cracked, dish pan hands. 2 Share this post Link to post Share on other sites
