Custom 3d printed badges, ornaments etc.

[Wheel Horse 3D 3,785]

So that will give added size, more capacity with the ABS prints, I can put more on at one time, and an addituonal printer to keep busy:)

[ebinmaine 67,256]

12 minutes ago, Wheel Horse 3D said:

This one will get us to 12in x 12in x 12in

And can even get a bit longer on the diagonal!

So given that the length of the diagonal is going to be 12 x 1.414, I realize that's with very very thin things..... How long will you be able to print in a practical nature?

 

[squonk 41,018]

On 3/12/2021 at 8:54 AM, Wheel Horse 3D said:

"Caballo Diablo" hood ornaments now available in the store! Just message me if ya need details.

You guys are going all "Pontiac Chieftain " with the ornaments! 

 

[Wheel Horse 3D 3,785]

On my 8x8 i managed to print the headlight bezel diagonally. 2x15, 3x14,4x13 should be about max rectangulars for given width.

[Wheel Horse 3D 3,785]

Lol i wonder how a GIANT hood ornament would look just as a display piece!

[ebinmaine 67,256]

2 minutes ago, Wheel Horse 3D said:

Lol i wonder how a GIANT hood ornament would look just as a display piece!

We may have to talk about that.....

 

Remember I'm building a tractor called Colossus. 

[Wheel Horse 3D 3,785]

With the B17 as an example, i should be able to print that  in an 18" wingspan(150%) increase of 50% in size.

[Wheel Horse 3D 3,785]

1 minute ago, ebinmaine said:

We may have to talk about that.....

 

Remember I'm building a tractor called Colossus. 

I qas thi king more like the Colossus of Rhodes, Jolly Red Giant(of course he couldnt be GREEN!)

[ebinmaine 67,256]

4 minutes ago, Wheel Horse 3D said:

I qas thi king more like the Colossus of Rhodes, Jolly Red Giant(of course he couldnt be GREEN!)

No no no no. No green.

 

Haven't made up my mind what's going to be on that thing yet....

 

[Wheel Horse 3D 3,785]

Lets see the current ornament is about 2" high?

Sooo if we lengthened the base from 4" to 12"

In scale that would be 8" tall about 3-4" wide! Would actually be a bit taller i think.

That would be massive!

Edited March 16, 2021 by Wheel Horse 3D

[Wheel Horse 3D 3,785]

Definately Collosal! On the new printer could stretch that length a couple inches more so peobably 9 or almost 10 inches tall!

[ebinmaine 67,256]

4 minutes ago, Wheel Horse 3D said:

Lets see the current ornament is about 2" high?

Sooo if we lengthened the base from 4" to 12"

In scale that would be 8" tall about 3-4" wide! Would actually be a bit taller i think.

That would be massive!

I am finding this to be an excellent thing

 

IMHO... On the big scale version, I would narrow up some spots like where the wheel is.

[OldWorkHorse 3,045]

@ebinmaine found you a horse hood ornament for Colossus

[Wheel Horse 3D 3,785]

Could probably get 9 - 10 inch base on the current printer.

[Wheel Horse 3D 3,785]

1 minute ago, OldWorkHorse said:

@ebinmaine found you a horse hood ornament for Colossus

Lol just move the mounting location back a bit,(like directly over the driverl

[Wheel Horse 3D 3,785]

7 minutes ago, ebinmaine said:

I am finding this to be an excellent thing

 

IMHO... On the big scale version, I would narrow up some spots like where the wheel is.

Can only go so narrow with the wheel to keep it past the lines if the base.  Could possibly provide a gap there around the wheel like the one between the head and wheel and sink the wheel flush to the base. Or just carve a circular inset into the sides of the base.

Edited March 16, 2021 by Wheel Horse 3D

[ebinmaine 67,256]

5 minutes ago, Wheel Horse 3D said:

Lol just move the mounting location back a bit,(like directly over the driverl

Usually I'm associated with a slightly different part of the horse. 

[Wheel Horse 3D 3,785]

Could maybe print a big one like that hollow and turn it into a lamp!

[Wheel Horse 3D 3,785]

Adds a nice red glow to the Horse Barn!

[Wheel Horse 3D 3,785]

Put it on an angle bracket so it sticks face out from the wall, Nice!

[SylvanLakeWH 25,489]

33 minutes ago, ebinmaine said:

 

Remember I'm building a tractor called Colossus. 

oh yeah... vaguely remember... keeps coming up in various posts but... actual sightings...? More Bigfoot photos out there... do we need Congressional investigations into an alleged conspiracy to actually build a tractor...?

 

[Wheel Horse 3D 3,785]

Heres a couple of @OldWorkHorse ideas

[ebinmaine 67,256]

1 hour ago, SylvanLakeWH said:

oh yeah... vaguely remember... keeps coming up in various posts but... actual sightings...? More Bigfoot photos out there... do we need Congressional investigations into an alleged conspiracy to actually build a tractor...?

 

Yes absolutely. 

 

@Oldskool has had a fleeting glimpse of the alleged project. 

Perhaps he could verify it's existence but I wouldn't want to pressure him too awful much. 

[SylvanLakeWH 25,489]

Committee set up... report due in 6-8 years...

 

Congressional Committee chair:

 

[Wheel Horse 3D 3,785]

Speaking of @Oldskool ...someone might need a bigfoot of the himalayan variant hood ornament!