Custom 3d printed badges, ornaments etc.

[8ntruck 6,998]

On 3/24/2021 at 7:08 AM, Wheel Horse 3D said:

Hot off the printer with a quick acetone coat and some hardware!

Mr. Horsepower from who was it - Howard Cams?

[Wheel Horse 3D 3,795]

6 minutes ago, 8ntruck said:

Mr. Horsepower from who was it - Howard Cams?

Clay Smith cams,  hadnt thought of that, I only tie this one to Convoy and the Death Proof movies. But the Duck and cigar are definately a parallel! Maybe the clay smith cams influenced the Convoy movie design?

Edited March 26, 2021 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

1 hour ago, Jeff-C175 said:

 

I need one in the garden to leash all my bride's garden gnomes to!

 

[rjg854 11,361]

10 hours ago, Wheel Horse 3D said:

Is this on your site yet?  I just may have to have at least one of them. 

[Wheel Horse 3D 3,795]

26 minutes ago, rjg854 said:

Is this on your site yet?  I just may have to have at least one of them. 

Yes sir! Came out so well, i put it it right on.

[Wheel Horse 3D 3,795]

Still wonderin if the wheels should be wider...

[ebinmaine 67,455]

Wheel looks fine to me

[ebinmaine 67,455]

I showed the painted Post topper to Trina yesterday evening in the first thing out of her mouth was, door knocker?

[Wheel Horse 3D 3,795]

Just now, ebinmaine said:

I showed the painted Post topper to Trina yesterday evening in the first thing out of her mouth was, door knocker?

Hmmmmm...could easily be done...shift mount to the back, enlarge the ring a bit and go metal ring with a big bead at the bottom.

[Wheel Horse 3D 3,795]

Or like randy said move the ring to the hooves

[ebinmaine 67,455]

5 minutes ago, Wheel Horse 3D said:

Hmmmmm...could easily be done...shift mount to the back, enlarge the ring a bit and go metal ring with a big bead at the bottom.

No rush but mess around with that a little when you get a minute...

 

What is the height of this post topper horse?

[Wheel Horse 3D 3,795]

6 minutes ago, ebinmaine said:

 

What is the height of this post topper horse?

About 6.5- 7 inches overall. For scale, the bottom insert is 2"(well 1.95in) wide.

Edited March 26, 2021 by Wheel Horse 3D

[ebinmaine 67,455]

I'm thinking if the backing piece was a nice rugged thick maybe five or six inch diameter circle?

Me personally I would want the ring in the horses mouth.

Maybe oblong the ring or get rid of the bottom circle.

 

[Wheel Horse 3D 3,795]

We were kinda thinking along the same path..

[ebinmaine 67,455]

Lemme check for size later today. 

 

[Wheel Horse 3D 3,795]

I just went oval..lemme swap for circular and see what we got.

[Wheel Horse 3D 3,795]

Theres a quick idea of what a 6in circle would look like

[ebinmaine 67,455]

19 minutes ago, Wheel Horse 3D said:

Theres a quick idea of what a 6in circle would look like

 

 

 

I like that.

 

Can the base part where the ball hits be made extra strong? Like more solid than normal or whatever.....?

[Wheel Horse 3D 3,795]

2 hours ago, ebinmaine said:

 

 

 

I like that.

 

Can the base part where the ball hits be made extra strong? Like more solid than normal or whatever.....?

Im thinking the whole thing 100% infill. Ill print the bead too. That solid abs against solid abs should knock well!

Imagine 25 percent denser than the b17

Edited March 26, 2021 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

6 in circle, 6.5 in tall, bead is just over an inch in diameter

[Wheel Horse 3D 3,795]

Back plate is 10mm thick at edge and 6mm in the center.

[Wheel Horse 3D 3,795]

39 minutes ago, Wheel Horse 3D said:

Back plate is 10mm thick at edge and 6mm in the center.

Just changed to 12mm and 8mm

[ebinmaine 67,455]

How challenging is it to make the ring thicker?

[Wheel Horse 3D 3,795]

36 minutes ago, ebinmaine said:

How challenging is it to make the ring thicker?

This one is 6mm...how thick would ya like?

[Wheel Horse 3D 3,795]

Heres 8mm...