Custom 3d printed badges, ornaments etc.

[Wheel Horse 3D 3,795]

@Mickwhitt here ya go Mick. This is should be "precise enough" or " close enough for Army work!" And the front mounting hole is 5/8 back from the front edge (15mm) the mm measurements are the more acurate as these qere the original caliper measurements.(the 3d printers all run in metric)

Edited March 21, 2021 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

9 hours ago, Wheel Horse 3D said:

Very Nice! And I like that shop floor too!

Heres my reclaimed brick shop floor going in brick by brick, and my shop has never been more organized!(thus far, maybe ill get it straight one of these days)...to clarify this was over a year ago lol

Edited March 21, 2021 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

A couple more custom ornaments ready to fly home!

[bc.gold 3,403]

2 hours ago, Wheel Horse 3D said:

A couple more custom ornaments ready to fly home!

 

Could not resist the temptation.

 

[Wheel Horse 3D 3,795]

1 hour ago, bcgold said:

 

Could not resist the temptation.

 

He'll have to add machine gun sounds to that tractor! Not to mention wearing his goggles and scarf!

Edited March 21, 2021 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

Next custom ornament?

Edited March 22, 2021 by Wheel Horse 3D

[Mickwhitt 4,621]

Talking of machine gun noises, there was a James bond Aston Martin DB5 on Top gear last night 

Its built to modern specs and has all the toys of the original except the ejector seat. Machines guns come out of the sidelight lens, rear bullet proof shield, oil squirters, revolving number plates. 

Only thing is it cost 3.2 million pounds! And it can't be driven on public roads. 

And my little Red Fred can, so go figure....

[Wheel Horse 3D 3,795]

I used to roll around here with my 1948 Willys with a 50 cal M2 replica mounted

[Wheel Horse 3D 3,795]

Another fully painted, just about finished!

[Moparfanforever 844]

Think maybe you can do a Death Proof duck ornament ?? There is a guy on eBay selling a lot of them made from plastic , but he is selling them from Russia . Thanks !!

[Wheel Horse 3D 3,795]

1 minute ago, Moparfanforever said:

Think maybe you can do a Death Proof duck ornament ?? There is a guy on eBay selling a lot of them made from plastic , but he is selling them from Russia . Thanks !!

I sure can try..but first Ill need a Death Proof Duck education! Lol

[Moparfanforever 844]

Easy search , Death Proof or Convoy duck. Hard to post a pic at the moment.

 

The OG is fairly big , but the guy on the bay has them scaled down.

[Wheel Horse 3D 3,795]

Just now, Moparfanforever said:

Easy search , Death Proof or Convoy duck. Hard to post a pic at the moment.

 

The OG is fairly big , but the guy on the bay has them scaled down.

Gotcha! So how big should he be?

[Moparfanforever 844]

Not real sure ?? Maybe four inches long ?? Longer ?? 

[Wheel Horse 3D 3,795]

Just finished a large logo model, currently scaled at 4", about 1/4" thick at rim with horse and wheel slightly thicker

[Wheel Horse 3D 3,795]

2 minutes ago, Moparfanforever said:

Not real sure ?? Maybe four inches long ?? Longer ?? 

Should be able to do that. Ill message ya a link to the store so we can work out the details.

[Moparfanforever 844]

Maybe three inches. 

[Wheel Horse 3D 3,795]

1 hour ago, Wheel Horse 3D said:

Just finished a large logo model, currently scaled at 4", about 1/4" thick at rim with horse and wheel slightly thicker

Think I need to adjust the centering a bit there!

Needs to up an right a bit.

[Wheel Horse 3D 3,795]

Maybe square 4" ?

[Wheel Horse 3D 3,795]

And one hitching post top, sized for 2" id pipe

[Wheel Horse 3D 3,795]

And the Hubcap version

[Wheel Horse 3D 3,795]

4in round Large Logo, came out a little thinner than expected, about 3/16 thick but feels good has a bit of weight to it, and feels very much like a large coin lol!

Edited March 24, 2021 by Wheel Horse 3D

[ebinmaine 67,455]

Got some super cool stuff in the mail!!

 

 

 

[Wheel Horse 3D 3,795]

11 minutes ago, ebinmaine said:

Got some super cool stuff in the mail!!

 

 

 

Just holler if ya need any assembly hints!

[Wheel Horse 3D 3,795]

Will be putting one of the hitching post tops on tonight! Try to have a prototype done friday or Saturday!

Just so ya'll know, your likes etc. help guide me in what may have the most interest, when a design is where it needs to be, or when I prioritize a project ...so THANK YOU and keep 'em coming!

And feel free to chime in with any tweaks or suggestions for new stuff!

 

Quote

 

 

Edited March 24, 2021 by Wheel Horse 3D