Custom 3d printed badges, ornaments etc.

[Wheel Horse 3D 3,795]

One of the 1.6 inch ones, might fit. Is that cover clear? Kinda looks it.

[Wheel Horse 3D 3,795]

Either way if that does pop out, i bet we can design one to pop in!

Edited March 1, 2021 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

Heres the 3D head, with classic wheel!

[Jeff-C175 7,199]

16 minutes ago, Wheel Horse 3D said:

One of the 1.6 inch ones, might fit. Is that cover clear? Kinda looks it.

 

1.6 would be about a quarter inch too small I think.  No, it's black.  Looks clear I guess because of the reflection of the shop light.

Edited March 1, 2021 by Jeff-C175

[Jeff-C175 7,199]

13 minutes ago, Wheel Horse 3D said:

if that does pop out,

 

I looked at it close and I'm sure it does pop out.  I'll give it a push with a flat blade and see what happens.  I know how NOT to break things... but I am good at doing the opposite too!

[Wheel Horse 3D 3,795]

2 minutes ago, Jeff-C175 said:

 

1.6 would be about a quarter inch too small I think.  No, it's black.

Great thing is, with 3d print we can make it whatever size, shape we want!

[Jeff-C175 7,199]

Here's the pic I just emailed the .jpg of Grey...

 

[Wheel Horse 3D 3,795]

And heres one in silver...

[ebinmaine 67,436]

15 minutes ago, Wheel Horse 3D said:

And heres one in silver...

Is that printed, or painted?

 

[Wheel Horse 3D 3,795]

And Jeff's Horse goes up on the wall!

[Wheel Horse 3D 3,795]

5 minutes ago, ebinmaine said:

Is that printed, or painted?

 

That is painted.

[Wheel Horse 3D 3,795]

One day i hope to get that multi color unit, but for now were relying on enamel paints.

[Wheel Horse 3D 3,795]

On 2/16/2021 at 9:26 PM, ebinmaine said:

Pic available?

 

you asked about this much earlier @ebinmaine somehow I missed it.

Edited March 2, 2021 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

Since that pic I started painting the zip ties too.

[Jeff-C175 7,199]

3 minutes ago, Wheel Horse 3D said:

Since that pic I started painting the zip ties too.

 

Think about using the metal ones?

 

Maybe printing a 'pocket' for the zip tie head to fit into?

[Wheel Horse 3D 3,795]

1 minute ago, Jeff-C175 said:

 

Think about using the metal ones?

 

Maybe printing a 'pocket' for the zip tie head to fit into?

If could find a suitable thin metal solution that didnt have the hose clamp type screw id try those. Heres a different style with the hand painted ties.

[Wheel Horse 3D 3,795]

If i did a pocket, id need to actually imbed it between the handle halves. If i just did a side square its hard to torque the tie down  firmly.

The square head likes to be at a 45 rather than 90 if that makes sense.

[Wheel Horse 3D 3,795]

[Wheel Horse 3D 3,795]

I suppose i could do a kinda 45 degree half pocket.

[Wheel Horse 3D 3,795]

Lol one post from a week or so ago and I go all "Squirrel!!!!"

If ya can get that cover off @Jeff-C175 if we can get measurements down to about .005 or .010 of an inch im sure we can make it work!(or .25 mm)

Edited March 2, 2021 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

Here's what is currently on the bench Any other color combinations of any of those, like silver wheel, with black ring and silver hubcap?

[Jeff-C175 7,199]

1 hour ago, Wheel Horse 3D said:

thin metal solution that didnt have the hose clamp type screw id try those.

 

Panduit makes thin metal zip ties and the head is smaller than the plastic ones.  Also it goes straight in, no 90* bend.  But boy are they X spendive!!  

 

The generic metal ones on Amazon are WAY WAY cheaper!  

 

Zip ties can also be had in a wide variety of colors.

 

Edited March 2, 2021 by Jeff-C175

[Wheel Horse 3D 3,795]

Ill have to check for those!

[Wheel Horse 3D 3,795]

What do yall think of the hubcap done this way?

Ring of hub is shiny on this one, i painted over the silver there, normally it would be as dull as the rest of the plastic.

[Wheel Horse 3D 3,795]

1 hour ago, Jeff-C175 said:

 

Panduit makes thin metal zip ties and the head is smaller than the plastic ones.  Also it goes straight in, no 90* bend.  But boy are they X spendive!!  

 

The generic metal ones on Amazon are WAY WAY cheaper!  

 

Zip ties can also be had in a wide variety of colors.

 

I was just using what i have available lol. I even have the wider heavy duty ties that look good, size wise but the head of those is rather large.

Ideally, id like an option that the end user can install simply on their own jar, (jars are heavy and breakable! More expensive to ship, and possible breakage in shipment)