Custom 3d printed badges, ornaments etc.

[8ntruck 6,998]

2 hours ago, Wheel Horse 3D said:

Mine is a Bambu x1 carbon with 4 color AMS.

I ran this printer for almost 5000 hours befor replacing the extruder gear. Only other thing I replaced was one nozzle and the short filament sections in the AMS which get worn due to the tight bends in there.

Printing in this machine has just simply been hassle free.

It runs pretty much flawlessly with stock settings and most filaments.

Reviews of the P1P and A1 put them pretty close as to performance, but I can only speak confidently as to the X1C.

Previously I ran ender 3 and ender3 max machines, but the speed, consistency, and hassle free nature of the x1c has rendered them obsolete for my purposes.

 

Thanks.

[Wheel Horse 3D 3,795]

New site is well on it's way! I haven't updated the links in the vendor section yet, and still need to get the dashes uploaded, but most of the favorites are already up in the online store.

Https://greystone-3d.square.site

Wheelhorse items along with stuff for other tractors are in "THE TRACTOR STABLE" section.

Edited October 31 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

Also, A HUGE "Thank you" to this community.

Ya'll have been the foundation of our start, a source of Inspiration,encouragement, and patience as we have grown and developed new items, and now as we make a big transition, our anchor as we pivot and make a big move to increase our creative freedom and ability to serve our clients with more online capabilies.

[Wheel Horse 3D 3,795]

Dont forget, several of our digital models are available in the manuals section! You just have to be a Red Square supporter to download for free!

If you have downloaded and printed one of our models, please share your print with us!

Edited November 1 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

GT14 DASH AND TUNNELCOVERS NOW IN THE NEW STORE! We have also updated the links in the vendor section.

Were looking at one more fit test for of the D series before we repost those.

[Wheel Horse 3D 3,795]

As we transition, please try to add reviews to our site or Google business page:) 

https://maps.app.goo.gl/vdXJRdgArKSqxGDbA

[Wheel Horse 3D 3,795]

Final alignment tests on D series dash!

[Wheel Horse 3D 3,795]

I'm sure some of our electrician folks have seen a few of these broken or shattered. We came up with an improved heavier version and have them up and running at the power plant!

Gettin hard to find these for systems originally installed almost 30 years ago!

Edited November 13 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

1858 Remington! Been working in this off and on for 3 years! Finally have it working properly.

Cylinder spins, hammer spring and trigger working good, ram lever works well.

[Wheel Horse 3D 3,795]

Working on a composite approach with the D dashes, just finishing up a lower dash plate that uses high temp as its base, a medium temp with a more matte and smoother finish as the top layer, and finally high temp white for the text etc.

The finish still isn't perfect, but the matte lower temp looks much better! Compared to this

Edited November 15 by Wheel Horse 3D

[ebinmaine 67,459]

7 hours ago, Wheel Horse 3D said:

1858 Remington! Been working in this off and on for 3 years! Finally have it working properly.

Cylinder spins, hammer spring and trigger working good, ram lever works well.

 

 

This is ridiculously interesting 🤔 

 

Niiiiice work. 

Louis L'amour would be proud. 

[gt14rider 759]

20 hours ago, Wheel Horse 3D said:

1858 Remington! Been working in this off and on for 3 years! Finally have it working properly.

Cylinder spins, hammer spring and trigger working good, ram lever works well.

Did you get it to shoot yet     nice job, any other replica's

[Wheel Horse 3D 3,795]

1 hour ago, gt14rider said:

Did you get it to shoot yet     nice job, any other replica's

There's the 1/2 scale Ma Deuce!

And Randy @rjg854 has a 1:1 Thompson!

We've done a Webley(not our design, but we purchased the files)

And the Martini Henry we did for the same client

I wouldnt reccomend "shooting" any if 'em lol

 

Edited November 16 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

Oh and I almost forgot the HK M320 grenade launcher!(air soft..on my airsoft M4

 

Edited November 16 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

On 10/27/2024 at 11:18 AM, 8ntruck said:

 

 

You got any comments about the Bambu printers as a first printer?

Another new printer to watch is the Creality K2 with multifilament...basically an unabashed copy of the Bambu X1C with a larger print bed.

Creality is a big name, and if they pull this off well,   it will be the largest format multicolor in that class and less than the x1c with AMS. It is also expandable to 16 colors like the Bambu, for a few hundred less

[Wheel Horse 3D 3,795]

Our latest shop offering for Christmas! Super poseable Christmas Recon Elf! A highly trained North Pole operative ready to infiltrate and collect intelligence for Santa! With hyper realistic range of motion and with multiple hand and grip types he can get into all kinds of situations!

Edited yesterday at 03:18 AM by Wheel Horse 3D