Custom 3d printed badges, ornaments etc.

[Wheel Horse 3D 3,780]

The Buck sees all!

[Wheel Horse 3D 3,780]

Just a reminder, if you or a friend have a 3d printer, 3d stl files are available in the manuals section! Our OEM hood ornament replacement, headlight lenses for c series and 78 79 fiberglass hoods, the gt14 dash and console plates, and D series dash plates are all there!

Must be a RedSquare supporter to download, but it is a thank you to all of you on RS that helped develop replacements to keep the tractors equipped and helped to grow our business.

[Wheel Horse 3D 3,780]

Here goes! Fingers crossed! Holy filaments...says only 5 hr 6min...fast!

Edited June 29 by Wheel Horse 3D

[Wheel Horse 3D 3,780]

Just a few more minutes for white after the filament change!

[Wheel Horse 3D 3,780]

Ready for heat torture test on the @cafoose provided dash! Tunnel cover is printing now.

[Wheel Horse 3D 3,780]

Gt 14 dash is out baking in the front deck.

So far I am pleased with the results. Good finishes with very minor geometry ghosting, text is adhering very well. The text is slightly over extruded, but with text and lines that small the nozzle diameter is the limiting factor.

This first Gt14 set will go to @cafoose for testing and fitment checks and the first D series set will be launched out to @BMW1 for fitment and testing. Thank you guys for being patient and providing samples for modeling!

[Wheel Horse 3D 3,780]

Gt14 tunnel cover plate!

[Wheel Horse 3D 3,780]

D upper dash! Here you can see the pattern ghosting and the slight over extrusion of the text, but over all I'm calling it good!

[Wheel Horse 3D 3,780]

Links in the online store for GT14 and D series plates have been updated and linked to our vendor section!

[Wheel Horse 3D 3,780]

D series set with electric clutch option complete!

[Wheel Horse 3D 3,780]

Working on developing a relationship with a young local woodworker. I can do wood work, but the 'ol hands aren't as capable as they once were. Hopefully we can come up with some wood items, like laser etched or cnc carved Wheel Horse themed stuff! Any ideas to start out?

[Wheel Horse 3D 3,780]

While we're pondering on WheelHorse themed stuff, Cash, the young fella we're trying to support in his woodworking endeavors, is working on my military themed ammo crate bar.

[Wheel Horse 3D 3,780]

Charger 10 tunnel cover

[Wheel Horse 3D 3,780]

[Wheel Horse 3D 3,780]

Portable collapsible stool. Height fully adjustable!

[Wheel Horse 3D 3,780]

The latest revisions to our 1/2 scale Ma Deuce 50 cal setup! Ammo can and can tray are removable,  we've even added a flickering LED to the barrel tip that actuates from the triggers.

Have a client that wanted to "Rat Patrol" his mini jeep!

[Wheel Horse 3D 3,780]

@BMW1was kind enough to send us a D series dash housing for us to fine tune the D dashes with, so hopefully we can have that done here in the next week or 2.

[Wheel Horse 3D 3,780]

Modifications to D dash, fiddle with some hole spacing, and add a little tab to the underside to cover the gap, and merge the light bezel into the right half.

[Wheel Horse 3D 3,780]

Finally got around to dressing up the new ammo crate bar! Items from the Wilfong family service members as well as collected items from WW2 through Vietnam. A small section of my own stuff, and I'll keep adding items as I locate them:)

Edited October 7 by Wheel Horse 3D

[Wheel Horse 3D 3,780]

We may be moving off of the vintage and handmade items site and to our own

Domain and storefront .

Does anyone have any experience with this? Any pitfalls to avoid etc?

[Wheel Horse 3D 3,780]

Our new Site Is coming up online! We're not ready to process payments yet, but should be to that spot tomorrow as we continue the build:)

I'll be adding the Wheelhorse items tomorrow!

greystone-3d.square.site/

[Wheel Horse 3D 3,780]

Christmas is coming, so get your dibs on cookie cutters and plus sized keychain ornaments early! We're  gonna blow up our regular keychain Horses x2..should make great ornaments !

Edited October 27 by Wheel Horse 3D

[8ntruck 6,972]

@Wheel Horse 3D I've been thinking about getting a 3d printer for a while.  Originally thought a Prussia would be right.  Then the local high school where I mentor the robot team got a couple couple Bambu X1 printers.  Impressive machines, but not quite student proof.  This year, they got several Bambu A1 printers.  These have not been in operation long enough to see how they stand up to scholastic use.

 

Cost is coming down, the Bambus come assembeled and seem pretty good as a plug and play device.  The A1 is in the $500 range with 4 color capability.  Looks appealing.

 

You got any comments about the Bambu printers as a first printer?

[Wheel Horse 3D 3,780]

4 hours ago, 8ntruck said:

 

You got any comments about the Bambu printers as a first printer?

Mine is a Bambu x1 carbon with 4 color AMS.

I ran this printer for almost 5000 hours befor replacing the extruder gear. Only other thing I replaced was one nozzle and the short filament sections in the AMS which get worn due to the tight bends in there.

Printing in this machine has just simply been hassle free.

It runs pretty much flawlessly with stock settings and most filaments.

Reviews of the P1P and A1 put them pretty close as to performance, but I can only speak confidently as to the X1C.

Previously I ran ender 3 and ender3 max machines, but the speed, consistency, and hassle free nature of the x1c has rendered them obsolete for my purposes.

 

[Wheel Horse 3D 3,780]

I also run a QIDI x max 3. I find the extra build area handy and it so far has run similar to the Bambu in quality and speed