Custom 3d printed badges, ornaments etc.

[8ntruck 6,999]

Just to satisfy my curiosity, what caused that birds nest?  Extruder temp go bad?  Z axis hiccup?  Severe layer shift?

[ebinmaine 67,484]

@HorseFixer

Are these the same for a Single Stage Tall Chute and a Two Stage?

 

[HorseFixer 2,012]

3 hours ago, ebinmaine said:

@HorseFixer

Are these the same for a Single Stage Tall Chute and a Two Stage?

 

Enter your blower model 3 in Toro master parts viewer and go to the cute diagram and see if it has the part #25-5450 Retainer-Chute

[HorseFixer 2,012]

11 hours ago, Wheel Horse 3D said:

I dont see why not! Anybody have a busted one for a model???? We could even make them a little thicker and heavier depending on the failure point.

Yes I can get you one if you PM me your addy

[Wheel Horse 3D 3,795]

14 hours ago, 8ntruck said:

Just to satisfy my curiosity, what caused that birds nest?  Extruder temp go bad?  Z axis hiccup?  Severe layer shift?

First was I believe the entire part came loose from the bed...possible due to temp change here. Then had another where the nozzle started clogging due to heat creep and the extrusion was too low as a result and the layers weren't adhering properly.

Since then I had to put that machine to work on the M2 50 cals and made some more adjustments.

That's what's frustrating,  the bottom came out really well, then all of a sudden...WTF!

Just gotta keep tweaking all the time it seems. I really need to upgrade the large printers.

Just finishing up the 50 cals on order then I'll try that top again.

[Wheel Horse 3D 3,795]

[Wheel Horse 3D 3,795]

Hopefully in a few days we'll have a tank top!

[Wheel Horse 3D 3,795]

MERRY CHRISTMAS!

Had a client order a bunch of full color keychains for his Christmas tree!

Edited December 24, 2023 by Wheel Horse 3D

[Shynon 7,459]

On 12/22/2023 at 10:44 PM, Wheel Horse 3D said:

I dont see why not! Anybody have a busted one for a model???? We could even make them a little thicker and heavier depending on the failure point.

I printed some of these and the holes broke out when screws were installed. 

[Wheel Horse 3D 3,795]

7 hours ago, Shynon said:

I printed some of these and the holes broke out when screws were installed. 

Figuring on trying ABS with a 100 infill, and if that's a failure point add extra around the holes.

[Shynon 7,459]

1 hour ago, Wheel Horse 3D said:

Figuring on trying ABS with a 100 infill, and if that's a failure point add extra around the holes.

Used ASA 100 infill

[Wheel Horse 3D 3,795]

1 hour ago, Shynon said:

Used ASA 100 infill

Well I guess we can try. What type of material is the original?

Maybe try PTFE?

[Shynon 7,459]

Gonna try ASA again but thread some 12-24 threads in them. I have also milled some out of UHMW plastic, I have them on my blower this year. 

[Wheel Horse 3D 3,795]

15 hours ago, Shynon said:

Gonna try ASA again but thread some 12-24 threads in them. I have also milled some out of UHMW plastic, I have them on my blower this year. 

Maybe a metal tube insert? To keep from over tightening and crushing the plastic?

[Wheel Horse 3D 3,795]

Set of Atlas lathe gears! And a ( ahem cover your ears kiddies) Simplicity cookie cutter.

[Wheel Horse 3D 3,795]

"THE WORKS" frankenstein switch!

[Wheel Horse 3D 3,795]

It came to my attention that @lynnmor has a method for making the snow chute retainers at a decent price! I always try to defer to our fellow RS folks whenever possible.

 

[Wheel Horse 3D 3,795]

On that note, everyone please remember this thread is for everyone to share 3d printing ideas as related to Wheelhorse and 3d print stuff in general. If ever there is a request for an item a member already provides please let me know. For me this is about providing for the members and their Horses not competing with our fellow enthusiasts. Thanks!

[Wheel Horse 3D 3,795]

Pretty proud of this critter!!!

Edited January 3 by Wheel Horse 3D

[ebinmaine 67,484]

5 hours ago, Wheel Horse 3D said:

this

What's it meant for?  A stuff holder?

[Wheel Horse 3D 3,795]

2 hours ago, ebinmaine said:

What's it meant for?  A stuff 

collapsing grapple is ideal for use with 550 cord, and has a plethora of uses all in a compact lightweight package.
When closed Teardrop shape is ideal counterweight for throwing your line, as a bolo weight, plumb bob, or as a wedge to secure in small gaps.
Quickly Configurable from 1 to all four arms depending on application.
a grapple or drag for removing obstacles or disarming trip wires, pulling down cables etc.
Use to retrieve or lift gear to higher spot.
Use as an equipment and clothing hanger around camp, hang from above or secure around tree trunks.
Use with short wrist lanyard to carry grocery bags
Use with a long line or short wrist lanyard for pulling away barbed wire, can be lashed to a stick for multiple uses.
Use as a gill hook or shore anchor 
Use to hang game for processing 
Ideal for camping food cache! Toss while closed over a limb, open and hang grocery bags on arms, pull and secure end of line!
Great for shelter options in the brush, provides many different ways to secure lines. 
Not for Climbing use. Lol

[Wheel Horse 3D 3,795]

Still working through the Browning 50 cal orders, but just as soon as that is done we'll be back on to the gt14 gas tank top with some new settings fine tuned.

Edited January 9 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

Once we get the top done, we'll do another dash test to see how the new settings work for that.

[Wheel Horse 3D 3,795]

Startin' to look like an armory 'round here!

One complete, one waiting for triggers, and one waiting bolt and triggers, and partial components of at least 2 more .

[953 nut 55,222]

2 hours ago, Wheel Horse 3D said:

Startin' to look like an armory 'round here!

I think the ATF agents are coming around the corner headed for your house.