Custom 3d printed badges, ornaments etc.

[cafoose 3,354]

Sorry one of the pictures was blurry so I edited it

[Wheel Horse 3D 3,795]

4 hours ago, cafoose said:

 

Man i think that would have to be at least a 4 part deal with the printers I have. Biggest dimension I have is about 11.75

[cafoose 3,354]

If you think it's doable and it will work I'd say go for it

[Wheel Horse 3D 3,795]

25 minutes ago, cafoose said:

If you think it's doable and it will work I'd say go for it

Is there any dimension under 12"?

If that's the case, I could make stackable rings. If not it will have to be quartered at least.

[cafoose 3,354]

6 minutes ago, Wheel Horse 3D said:

Is there any dimension under 12"?

If that's the case, I could make stackable rings. If not it will have to be quartered at least.

As long as it holds gas and doesn't leak anything you can do will be good. @19richie66 is getting dimensions.Maybe that would help?

[Wheel Horse 3D 3,795]

Have been thinking on the next printer to purchase. Whether to upgrade size, or to go with another speedy Bambu.

Might have to think more in size ! Lol

[Wheel Horse 3D 3,795]

5 minutes ago, cafoose said:

As long as it holds gas and doesn't leak anything you can do will be good. @19richie66 is getting dimensions.Maybe that would help?

If they were fabricating them they'd have everything I'd need to model with!

[Wheel Horse 3D 3,795]

Just finished up this project! Pretty proud of it. 4tpi well pipe to 8tpi well pipe adapters. Original on the left, draft center, and final done in a higher temp chemical resistant filament at full density. Thread design worked out well with a couple drafts to get the female sizing just right.

[ebinmaine 67,438]

10 hours ago, Wheel Horse 3D said:

4tpi well pipe to 8tpi well pipe adapters

I've never messed with a well. 

What's the purpose of you building those as compared to buying them?

Not available?

Pricey?

You felt like it?

 

[wallfish 16,994]

43 minutes ago, ebinmaine said:

I've never messed with a well. 

What's the purpose of you building those as compared to buying them?

Not available?

Pricey?

You felt like it?

 

I asked Grey if he could 3D me some specialty pipe adapter parts. They are not available off the shelf.

He took on the challenge with doing the threaded parts and knocked them out very quickly. Impressive and done at a fair price.

[ebinmaine 67,438]

26 minutes ago, wallfish said:

I asked Grey if he could 3D me some specialty pipe adapter parts. They are not available off the shelf.

He took on the challenge with doing the threaded parts and knocked them out very quickly. Impressive and done at a fair price.

NIIIIICE 

[Wheel Horse 3D 3,795]

Another @wallfish custom part!

[Wheel Horse 3D 3,795]

Just received a GT14 tank from @cafoose

To see if we can get a suitable replacement printed.

[Wheel Horse 3D 3,795]

Another use for the printers!.....custom leather embossing! Just a quick test on the click press...some really interesting stuff

Edited November 14, 2023 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

Preliminary GT14 gas tank model!

[Wheel Horse 3D 3,795]

Filler neck modeled!

Edited November 18, 2023 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

Slammed with tombstone orders! Each heavy duty set takes over 48 hours to print and 2 full spools of filament. Had to order in more red!

[ebinmaine 67,438]

1 hour ago, Wheel Horse 3D said:

Slammed with tombstone orders!

Excellent!!! 

[Wheel Horse 3D 3,795]

Confirmed tombstone handle on one half of the heavy duty version can handle at least 25 lbs!

Edited November 19, 2023 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

Tank parts split up for print.

[Wheel Horse 3D 3,795]

Each half will be 4 DAYS of printing and 1.5 spools of filament! Gonna have to find some inexpensive filament to keep cost down.

[oliver2-44 9,739]

On the GT14 gas tank are you printing them with the original bottom outlet nipple, or are you putting a heavy boss at the bottom for a rubber gas bushing ?

[Wheel Horse 3D 3,795]

On 11/21/2023 at 11:40 AM, oliver2-44 said:

On the GT14 gas tank are you printing them with the original bottom outlet nipple, or are you putting a heavy boss at the bottom for a rubber gas bushing ?

If ya look closely, there's an outlet right hand bottom. I was figuring ya could tap and insert a brass fitting, perhaps a 90 degree 3/8 or 1/4 NPT hose barb?

Edited November 22, 2023 by Wheel Horse 3D

[Wheel Horse 3D 3,795]

The tanks will still have some DIY to do.

Epoxy and seal the 2 halves together, maybe do a coat of gas tank sealer, and add your outlet fitting.

 

Next to do is design the cap and be sure to incorporate the vent hole.

[oliver2-44 9,739]

@Wheel Horse 3D If these tanks work out,  the tanks for the WH Suburbans and RJ’s should be next on your list.  Used ones are selling for over $100 on Evil Bay and are usually so rusty you have to seal them. The Suburban and RJ tank are the same size and shape, but inlet and outlet are in slightly different locations. Also they are a lot smaller,   I’ll try to find some pictures.