ohiofarmer 3,276 #51 Posted January 29, 2021 I put the wide Deestones from the 520 on a little feller. I asked the Mrs to sit on it for a picture, but she got suspicious when I went to the back of the tractor I keep getting those rolling pin headaches........ 4 Share this post Link to post Share on other sites
ebinmaine 67,596 #52 Posted January 29, 2021 3 minutes ago, ohiofarmer said: I put the wide Deestones from the 520 on a little feller. I asked the Mrs to sit on it for a picture, but she got suspicious when I went to the back of the tractor I keep getting those rolling pin headaches........ You will never learn..... and neither will I..... and that is okay. 1 Share this post Link to post Share on other sites
WVHillbilly520H 10,373 #53 Posted January 29, 2021 (edited) 9 hours ago, giddyap said: Although I'm late and they're history, here's my contribution of an old photo. If I may comment on tires to push snow, I have a set similar to pullstart's Post #2. Mine are 24x12-12 and they are useless and only fit my yellow machine. I once liked 23x10.5-12 Deestone Ags with premium chains but I now favor 25x10-12 ATV tires with low psi and a 4" pulley on the engine Those of Kevin's in post are R4 industrial tires not so much traction without lots of weight and 4wd, they are more for wear resistance, and I tried the Deestone style for whatever reason they are not a snow tire without chains, but ever since going OTR in my general experiences so far 100% 4 seasons without chains but i do have them fluid filled and iron weights. Edited January 30, 2021 by WVHillbilly520H 4 1 Share this post Link to post Share on other sites
ebinmaine 67,596 #55 Posted April 7, 2021 5 minutes ago, pullstart said: Need more weight 1 Share this post Link to post Share on other sites
Pullstart 62,906 #56 Posted April 7, 2021 1 hour ago, ebinmaine said: Need more weight Me standing on those back tubes picks the front end up 2 Share this post Link to post Share on other sites
Stepney 2,325 #59 Posted April 7, 2021 Gotta get the Lawn Ranger out for some size comparison shots.. 1 3 Share this post Link to post Share on other sites
Pullstart 62,906 #61 Posted April 7, 2021 6 minutes ago, 19richie66 said: So awesome! 🤤 2 1 Share this post Link to post Share on other sites
19richie66 17,508 #62 Posted April 7, 2021 (edited) 1 hour ago, pullstart said: So awesome! 🤤 Thanks bud. She’s still going strong. Want to finish her soon. Edited April 7, 2021 by 19richie66 2 Share this post Link to post Share on other sites
Tractorhead 9,064 #63 Posted April 8, 2021 11 hours ago, pullstart said: Me standing on those back tubes picks the front end up With or without mounted FEL mechanics? Share this post Link to post Share on other sites
Pullstart 62,906 #64 Posted April 8, 2021 2 hours ago, Tractorhead said: With or without mounted FEL mechanics? Without Share this post Link to post Share on other sites
Tractorhead 9,064 #65 Posted April 8, 2021 Sounds well balanced. 1 Share this post Link to post Share on other sites
Aldon 4,826 #66 Posted April 9, 2021 On 4/7/2021 at 4:14 PM, 19richie66 said: Thanks bud. She’s still going strong. Want to finish her soon. Its surprising how long we can take to put the finishing touches on our projects. I still need to tear down the GT22-8 beast and paint/finish it. Might actually happen this year. Due to taxes, I wont be driving out to the show so I guess I get another years reprieve. 1 2 Share this post Link to post Share on other sites
19richie66 17,508 #67 Posted April 9, 2021 (edited) 5 hours ago, Aldon said: Its surprising how long we can take to put the finishing touches on our projects. I still need to tear down the GT22-8 beast and paint/finish it. Might actually happen this year. Due to taxes, I wont be driving out to the show so I guess I get another years reprieve. Mine hasn’t changed a bit since that show. I am getting ready to finish the three point linkage and get it working. I have a complete rear fender set that I am going to repaint to go on it when I get a chance. Getting ready to start a new job so I don’t think I’ll have time off accumulated by show time. Guess I’ll get another year to catch up myself. Good to see you still in the mix. Edited April 9, 2021 by 19richie66 2 1 Share this post Link to post Share on other sites
ebinmaine 67,596 #68 Posted April 9, 2021 46 minutes ago, 19richie66 said: Good to see you still in the mix @Aldon you still out west? 1 Share this post Link to post Share on other sites
Aldon 4,826 #69 Posted April 12, 2021 Im still kickin in Potato land;-) 2 Share this post Link to post Share on other sites
squonk 41,150 #70 Posted April 12, 2021 On 4/9/2021 at 12:37 PM, Aldon said: Its surprising how long we can take to put the finishing touches on our projects. I still need to tear down the GT22-8 beast and paint/finish it. Might actually happen this year. Due to taxes, I wont be driving out to the show so I guess I get another years reprieve. Before you do come to the show again, please clean your cooler! 1 3 Share this post Link to post Share on other sites
stevasaurus 22,764 #71 Posted April 12, 2021 Wide load Wednesday... 11 2 Share this post Link to post Share on other sites
squonk 41,150 #72 Posted April 12, 2021 6 minutes ago, stevasaurus said: Wide load Wednesday... No cupholder ? 1 2 Share this post Link to post Share on other sites
Stormin 9,981 #73 Posted April 12, 2021 22 minutes ago, stevasaurus said: Wide load Wednesday... That's just cruelty. 3 Share this post Link to post Share on other sites
Stormin 9,981 #75 Posted April 12, 2021 He keeps telling us he's on a diet, mIKe. . 3 Share this post Link to post Share on other sites
