Larry Chamberlain 16 #1 Posted January 12, 2021 Looking for a long hood i put a 12hp on a short frame would like a long hood somi can utilize i My headlights Also choke cable for k301 And anyone on here build tierods with the heim joints or has a parts list for them i can build them myself if need be Thanks everyone Larry from pa 1 Share this post Link to post Share on other sites
ebinmaine 68,887 #2 Posted January 12, 2021 Larry you can get choke and throttle cables from psep.biz. Good prices. Good freight. Good quality parts. For the heim joints what I did was to order a quantity of four, 7/16 double male joints with all right hand thread. Trusted source for those would be McMaster Carr. You'll need fine thread jam nuts and I've probably got 40 of them. PM me your address and I'll send you a few. The reason I went with 7/16 instead of 3/8 is that most of the steering knuckle and steering rod end holes I've seen have been slightly egg-shaped or wallowed out. Using a 7/16 drill you can get a nice round even mounting hole and you get a connection that is substantially stronger than a stock 3/8 joint. @Greentored Scott actually just started a thread yesterday talking about making custom parts for people so he could hook you up with the rods themselves. 2 1 1 Share this post Link to post Share on other sites
Ed Kennell 39,222 #3 Posted January 12, 2021 Looks like Eric has your answers on the tie rods. I have hoods if you ever get close to York. 2 Share this post Link to post Share on other sites
stevasaurus 22,914 #4 Posted January 12, 2021 Next time Larry, please use the "Classified / Wanted" section for looking for parts. Share this post Link to post Share on other sites
