Pond / Speedex FG tire info?

[Danny101 26]

Hello All, new guy here hoping that someone can help me with the rear tire size needed for this Speedex / Pond FG  that I am beginning to restore.  The rear tires had completely disintegrated and were unreadable when I acquired this old girl.  I'm hoping that someone here will know the correct tire size needed. I believe these are the original rims.  Any help is much appreciated!  This is my first tractor to attempt to restore so please go easy on me, lol.

[ebinmaine 67,701]

15 minutes ago, Danny101 said:

This is my first tractor to attempt to restore so please go easy on me, lol.

And what a start!

 

I can't help with the tire info but 

[Lee1977 6,673]

Old tractor tire sizes are the tire width x the rim diameter.  The tire can be wider then the rim.

[SylvanLakeWH 25,606]

 

Nice!!!

[elcamino/wheelhorse 9,326]

We need more pictures of the entire tractor. What a find.

[953 nut 55,331]

You have a true collector's piece there.                    You may be able to find something to fit your rims here. https://www.millertire.com/antique-tractor-tires-wheels/

[oliver2-44 9,767]

from another Texas. There a few of us Texans on here @ZXT

May we ask where you found that.  Please start a thread here on your restoration so we can follow along. 

You will also find lots of helpful advice here along with the friendliest people 9 and a little good natured ribbing one you've been around awhile.

So does that have a Model T Radiator, Engine, Clutch, Transmission, Steering and just a Speedex/Pond rear end?

 

I see Odem is near Corpus Christi, I was just down there right before Thanksgiving, and may be going again next week.

[Shynon 7,459]

@oldiron613 should be able to help

[oldiron613 583]

Wow, an FG Lowboy! That's a super cool find.

 

The rear tires are tough to find and expensive being 22". Firestone 7.50x22 Firestone tires through ME Miller tire (when they have them) will be your best and possibly only bet.

 

Congrats again, and good luck!

 

Rob

[ZXT 2,401]

Welcome, Danny! Very cool tractor there. Like Jim said, please start a thread when you begin your resto. We love following along and can lend advice along the way.

 

@Stepney will likely like the blue Ford in the background!

[ZXT 2,401]

59 minutes ago, oliver2-44 said:

 

So does that have a Model T Radiator, Engine, Clutch, Transmission, Steering and just a Speedex/Pond rear end?

Jim, the engine/trans are Model A. Rear end looks to be T.

Edited January 9, 2021 by ZXT

[Stepney 2,325]

Never seen that one.. what a machine too. I had a much larger Worthington with a Model A engine. Whole lot of power for a little rig like that, when the Gibson and early PK tractors were still sporting a Briggs 7.25, or a Wisconsin 8..

Love the truck too! Looks like my old girl..

Does it have any sort of PTO to actually put the 40 horse engine to work?

Edited January 9, 2021 by Stepney

[953 nut 55,331]

There is a photo in "Straight From the Horses Mouth" with Elmer Pond driving a tractor much like the one you have.      Could this be the same tractor?          

[ebinmaine 67,701]

11 minutes ago, 953 nut said:

 Could this be the same tractor?

Boy wouldn't that be something.....

[Oldskool 6,644]

Welcome. Very nice tractor you have there. Cant wait to see progress pics.

[Herder 2,354]

13 hours ago, elcamino/wheelhorse said:

We need more pictures of the entire tractor. What a find.

Yes we do.

[Pullstart 62,922]

 and cool tractor!  What are the rollers on the frame next to the engine?  @Jennifer had some rear tires, I don’t recall the size but they wouldn’t work for my needs.

[Oldskool 6,644]

58 minutes ago, pullstart said:

 and cool tractor!  What are the rollers on the frame next to the engine?  @Jennifer had some rear tires, I don’t recall the size but they wouldn’t work for my needs.

I was wondering about the rollers as well

[Danny101 26]

On 1/9/2021 at 10:18 AM, pullstart said:

 and cool tractor!  What are the rollers on the frame next to the engine?  @Jennifer had some rear tires, I don’t recall the size but they wouldn’t work for my needs.

I believe that the rollers are there to assist with tight turns and to keep the tires off of the frame. There are 3 wooden rollers on the right side but only one on the left side. The rollers on the right are on a metal bar and as one was used up, the next one could be slid up to the front.  I guess they didn't turn to the left very much back then.

Edited January 10, 2021 by Danny101
clarify

[Danny101 26]

On 1/8/2021 at 8:13 PM, Stepney said:

Never seen that one.. what a machine too. I had a much larger Worthington with a Model A engine. Whole lot of power for a little rig like that, when the Gibson and early PK tractors were still sporting a Briggs 7.25, or a Wisconsin 8..

Love the truck too! Looks like my old girl..

Does it have any sort of PTO to actually put the 40 horse engine to work?

No, it does not have any sort of PTO

[Danny101 26]

On 1/8/2021 at 8:13 PM, Stepney said:

Never seen that one.. what a machine too. I had a much larger Worthington with a Model A engine. Whole lot of power for a little rig like that, when the Gibson and early PK tractors were still sporting a Briggs 7.25, or a Wisconsin 8..

Love the truck too! Looks like my old girl..

Does it have any sort of PTO to actually put the 40 horse engine to work?

 

On 1/9/2021 at 6:15 AM, Herder said:

Yes we do.

I'll put some more pics up this week.

[Danny101 26]

On 1/9/2021 at 5:52 AM, Oldskool said:

Welcome. Very nice tractor you have there. Cant wait to see progress pics.

Thanks, I'll keep ya'll updated as I go along.

[Danny101 26]

On 1/8/2021 at 7:53 PM, ZXT said:

Jim, the engine/trans are Model A. Rear end looks to be T.

I was told that it was Model A engine & transmission and Model T rear

[Danny101 26]

On 1/8/2021 at 7:12 PM, oldiron613 said:

Wow, an FG Lowboy! That's a super cool find.

 

The rear tires are tough to find and expensive being 22". Firestone 7.50x22 Firestone tires through ME Miller tire (when they have them) will be your best and possibly only bet.

 

Congrats again, and good luck!

 

Rob

I am going to get my local tire shop to try those

[Danny101 26]

On 1/8/2021 at 7:02 PM, oliver2-44 said:

from another Texas. There a few of us Texans on here @ZXT

May we ask where you found that.  Please start a thread here on your restoration so we can follow along. 

You will also find lots of helpful advice here along with the friendliest people 9 and a little good natured ribbing one you've been around awhile.

So does that have a Model T Radiator, Engine, Clutch, Transmission, Steering and just a Speedex/Pond rear end?

 

I see Odem is near Corpus Christi, I was just down there right before Thanksgiving, and may be going again next week.

It came in to my auction barn in this condition several months ago and I am just now getting around to it.  It is Model A radiator & shroud, engine and trans with Model T rear end