Jump to content
TJ5208

opinions on ags & tri ribs

Recommended Posts

RandyLittrell

Share this post


Link to post
Share on other sites
 
TJ5208

well im glad to know that i wont bend the axle 

Share this post


Link to post
Share on other sites
 
TJ5208

what kind of bushings

Share this post


Link to post
Share on other sites
 
TJ5208

i have a question can you fill tires without a tube

Share this post


Link to post
Share on other sites
 
Achto
12 minutes ago, Tj salyers said:

i have a question can you fill tires without a tube

 

Yes, if you use RV antifreeze or Rim Saver fluid

Share this post


Link to post
Share on other sites
 
TJ5208

Okay do you have one with rv antifreeze 

Share this post


Link to post
Share on other sites
 
Achto
19 minutes ago, Tj salyers said:

what kind of bushings

 

For the axle spacers some thing on this line would work. Important dimensions will be inside diameter (3/4 inch) and the length that you need.

 

https://www.lowbrowcustoms.com/products/3-4-inch-id-x-3-4-inch-long-aluminum-motorcycle-wheel-axle-spacers-pair?variant=31149096370223&utm_medium=cpc&utm_source=google&utm_campaign=Google Shopping&gclid=EAIaIQobChMIspW7mpGU7gIVpuHACh1giAeqEAQYCSABEgJG7vD_BwE

Share this post


Link to post
Share on other sites
 
TJ5208

Can you find it on amazon because I can't use any other site because of visa cards

Share this post


Link to post
Share on other sites
 
TJ5208

But I regularly buy a amazon card at the store

Share this post


Link to post
Share on other sites
 
TJ5208

Im at my braces appointment I have internet my phone does not have a SIM in it I have a chromebook but have no internet at home except a little box Verizon box that don't have much WiFi on it hope you guys understand 

Share this post


Link to post
Share on other sites
 
Achto
2 minutes ago, Tj salyers said:

Okay do you have one with rv antifreeze 

 

I personally do not have any tractors with loaded tires but many people on this forum do run RV antifreeze in their tires.

 

13 minutes ago, Tj salyers said:

Can you find it on amazon because I can't use any other site because of visa cards

 If you search (3/4" i.d. axle spacers) on Amazon, I'm sure that you find some thing.

Share this post


Link to post
Share on other sites
 
TJ5208

I'll have to measure the gap so I can get the right one

Share this post


Link to post
Share on other sites
 
TJ5208

The best thing is the bearings stick out so that will help I might use washers what do you guys think

Share this post


Link to post
Share on other sites
 
Achto
2 minutes ago, Tj salyers said:

I might use washers what do you guys think

 Washers will work with no problem.

 

Post a picture of your original rims. I'll be able to tell you if the Deestones will fit on to your original rims. Might be able to save the hassle of spacing out the rims that you showed us.

Share this post


Link to post
Share on other sites
 
TJ5208

Well thought it would look wierd both to go leaving internet

20201215_133121 (1).jpg

Share this post


Link to post
Share on other sites
 
TJ5208

I liked the thinner rims

 

Share this post


Link to post
Share on other sites
 
Achto

The rims that are on the front of your tractor are the exact same rims that are on my 1076 and Raider 12. The Deestones will fit those with no issues.  

  • Excellent 1

Share this post


Link to post
Share on other sites
 
TJ5208

Here's a picture

Screenshot_20210111-103940.png

Share this post


Link to post
Share on other sites
 
TJ5208

Thanks Dan aleast I know that now

  • Like 1

Share this post


Link to post
Share on other sites
 
TJ5208

Got to go 

Share this post


Link to post
Share on other sites
 
TJ5208

the rims on ole red is 16 6 50 8

Share this post


Link to post
Share on other sites
 
Achto

That is the tire size. The rim will only be 4.5 to 5 inches wide. If you look at the picture of my C-141 that I sent you. You can see that those rims have a deep dish & are a lot wider. The C-141 rims would not work with the Deestones.

  • Like 1

Share this post


Link to post
Share on other sites
 
TJ5208

so are you saying dan they wont work. do you guys think they would look wierd on 16 6 50 8 rims or should i stick with the thin rims. i get my braces off next time i always picked grey i choise red this time for wheel horse i thought since this is my last time id do it  thanks for all the help everyone

  • Like 1

Share this post


Link to post
Share on other sites
 
Achto
1 hour ago, Tj salyers said:

so are you saying dan they wont work. do you guys think they would look wierd on 16 6 50 8 rims or should i stick with the thin rims. i get my braces off next time i always picked grey i choise red this time for wheel horse i thought since this is my last time id do it  thanks for all the help everyone

 

The Deestones should work and look fine on the original :wh: rims that were on the tractor. If you are still uncertain, mount one new tire on to the original rims and see how it looks. If you don't like the look then remove the tire & mount them both on the other rims.

 

I like the :wh: red braces idea!!

Edited by Achto
  • Like 1

Share this post


Link to post
Share on other sites
 
TJ5208

thanks it is my last time ill get my braces off next time 6 weeks what happens if the tire streches will it still fit

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...