Chris G 3,296 #1 Posted January 5, 2021 I'm sure this subject has been talked about before. But here I go with it again. I have a hydraulic pump and cylinder from a 1054. I'm gonna be adding it to a short frame tractor. I was wondering if anyone can point me in the direction of some pics and maybe measurements of the pump mounting plates needed, the cylinder axle bracket mount and the rockshaft for a 61 or 62 model. Any help is greatly appreciated and thanks ahead of time for any info or suggestions/ guidance offered. Share this post Link to post Share on other sites
953 nut 55,388 #2 Posted January 5, 2021 Here is a thread that @WHX24 posted that has a good deal of information you can use. Also attached the HY-2 IPL. 1 1 Share this post Link to post Share on other sites
WHX?? 48,847 #3 Posted January 5, 2021 here as I have a Raider 12 project I am going to put HY on. I can get you the dims of the hood stand mounting bracket but if someone has got one that isn't mounted we could get better dims. For the ram mount there are a couple of ways to go at it. An axle bracket like shown is the thread 'Nut put a link to so the ram faces forward. This might be the best way or even the only way for for a short frame. The other way is just slide the ram on the front footrest and use a modified rockshaft or one off a early C series. This might get pic heavy to show you what I mean. Some pics of the pump mount first. 3rd and 4th 5th pic of how I tried to mount it (the ram) on a 1257 and how is was on the 753 it came off off. For some reason CRS I didn't like it. 2 Share this post Link to post Share on other sites
WHX?? 48,847 #4 Posted January 5, 2021 Got a look at how Mike @prondzy had his mounted.... Might run out of room on short tho??? 2 Share this post Link to post Share on other sites
WHX?? 48,847 #5 Posted January 5, 2021 (edited) Looked good to me so just copied it for my plow mule. This pump is off a 953/1054. Was going for the rat fink look on this lever! Edited January 5, 2021 by WHX24 2 Share this post Link to post Share on other sites
WHX?? 48,847 #6 Posted January 5, 2021 (edited) All my brackets and rock shaft are a stock HY-2 off a 753 Hope this gives ya some ideas Chris.... Edited January 5, 2021 by WHX24 2 Share this post Link to post Share on other sites
WHX?? 48,847 #7 Posted January 6, 2021 Forgot to ask Chris what tractor are we putting this on and how will we working it, deck, blade, tiller? HY queens @wheelhorseman and @Lane Ranger might be able to help too. Share this post Link to post Share on other sites
Chris G 3,296 #8 Posted January 6, 2021 @WHX24 it will be used specifaclly for snow blade and possibly mid mount blade and a rear brinly hitch. The tractor would be a 1045 in round about sense. Its a 1055, with a 552 dash tower and brake guard, 701 fenders and tool box. 2 Share this post Link to post Share on other sites
RandyLittrell 3,885 #9 Posted January 6, 2021 Love those square hood, round fender rides!! Randy 1 Share this post Link to post Share on other sites
