79365 single stage snowblower parts

[Slippery 16]

I need to rebuild the chain, sprocket and misc bearings on my single stage snowblower for my 520lxi. I found parts on line but they were very expensive.  Is there a good place to get reasonably priced parts for this?

[stevasaurus 23,065]

For the chain...maybe Tractor Supply.  For the sprocket...one of our venders @A-Z Tractor.  For the bearings...another vender Lowell  @wheelhorseman.  

[peter lena 9,088]

SLIPPERY, TRY TRACTOR SUPPLY, also on the RED SQUARE SITE , vendors . use specific  CHAIN AND OPEN GEAR  LUBRICANT ON THAT CHAIN SET UP ,  I  never let mine dry out , lubricate after use so it stays wet. also check out the lower adjustment bolt for that . LOWER SIDE  EDGE OF BLOWER INTAKE. MAKE A POINT OF LUBRICATING ANY RELATED MOVEMENT POINTS ,  you should be able to spin over the drive by hand , pete

[squonk 42,534]

If the parts are the same as the std. 79360 tall shoot , TSC has everything. No. 40 chain, sprockets, bearings and the lube. Pick up some Teddy's Root Beer whilst you're there! 

[vanillaman 11]

I needed to replace all bearings and sprockets on my s s 42 inch blower. I found the sprockets and bearings at amazon at really reasonable prices. It took a lot of looking to match up everything but I was able to find what I needed. Also I found auger bearings at a local husky dealer at 1/2 the price of napa who wanted $50.00 each.

[WVHillbilly520H 10,376]

5 hours ago, Slippery said:

I need to rebuild the chain, sprocket and misc bearings on my single stage snowblower for my 520lxi. I found parts on line but they were very expensive.  Is there a good place to get reasonably priced parts for this?

When I rebuilt mine about 6-7 years ago, I got everything at the big bearing store online, better quality sprockets and bearings than TSC...https://thebigbearingstore.com/... Just need to know your I.D. O.D. bearings and tooth count for sprockets with #40 roller chain.

[Slippery 16]

Any chance anyone would know the sizes of everything I'd need? I know that makes me sound lazy but I don't have a heated place to work on this and it would be nice to tear it all apart and have replacement parts on hand to put it back together right away. 

[WVHillbilly520H 10,376]

35 minutes ago, Slippery said:

Any chance anyone would know the sizes of everything I'd need? I know that makes me sound lazy but I don't have a heated place to work on this and it would be nice to tear it all apart and have replacement parts on hand to put it back together right away. 

Go here,       https://www.partstree.com/models/79365-toro-42-single-stage-snow-thrower-for-5xi-garden-tractors-sn-089000001-089999999-1998/      get your parts numbers and descriptions then using those cross reference with google to find them at TSC or The Big Bearing Store ect.

[Slippery 16]

Sweet thank you!