snowhound 105 #1 Posted December 2, 2020 Besides electrical will I need to make any modifications to replace a Kohler M12 with a Kohler K12 or Kohler K16? 1 Share this post Link to post Share on other sites
Achto 27,635 #2 Posted December 2, 2020 58 minutes ago, snowhound said: Besides electrical will I need to make any modifications to replace a Kohler M12 with a Kohler K12 or Kohler K16? Mechanically it should drop right in,providing that the new motor has a wheel Horse oil pan with the threaded mounting holes on the left side. If the new engine has a magneto ignition you should not even have to change much wiring. 4 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,069 #3 Posted December 2, 2020 Some have different charging systems. A 15 amp rectified and regulated system and others a dual circuit with a 3 amp unregulated system. Garry 1 Share this post Link to post Share on other sites
953 nut 55,389 #4 Posted December 2, 2020 Presuming your replacement engine came from a you can download the wiring diagram for the donor tractor and follow it. If it wasn't a then you can post the engine Spec Number here and we can help find a wiring system that will work. Presuming the replacement engine is a big-block I'm reasonably certain that the K-301 and K-321 block will fit the oil sump from the M-12. 1 Share this post Link to post Share on other sites
