WVHillbilly520H 10,373 #51 Posted February 22, 2021 Mostly my boy on the quads and my ASI 400. 3 1 Share this post Link to post Share on other sites
Pullstart 62,912 #52 Posted February 22, 2021 This is Jada and Rylee, there were just 9 and 10, almost 11 2 Share this post Link to post Share on other sites
JCM 9,177 #53 Posted May 15, 2021 Great weather to not pick up any tools or cans of Regal Red and throw a leg over the dual sport and hit some back country roads. One of my favorite stops is to catch the adrenaline junkies jumping out of airplanes only a 20 minute ride from home. 4 Share this post Link to post Share on other sites
Lee1977 6,666 #54 Posted May 18, 2021 Home built in 1964. Engine changed in 1968. 2 1 1 1 Share this post Link to post Share on other sites
tom2p 2,394 #55 Posted May 19, 2021 20 hours ago, Lee1977 said: Home built in 1964. Engine changed in 1968. omg - too cool ! double cool ! I had a Steen X-100 - a Hodaka powered mini - and a couple kids in the neighborhood had Super Rats ... my Steen had the mild Hodaka 100 - B 100 ? - but we later brought it up to Super Rat specs (and then some) ... 1 Share this post Link to post Share on other sites
Crazyredhorse 295 #56 Posted May 19, 2021 My 93/96 dr350 built from 2 bikes 1st one stolen and barried dug up n trashed but that and e bay parts just need to fab a battery box frame is kick model motor e start so diff batt and do some wiring but rode dirt many years crs/rms/xls had alot of them. 2 Share this post Link to post Share on other sites
Crazyredhorse 295 #57 Posted July 7, 2021 (edited) On 5/19/2021 at 12:04 AM, Crazyredhorse said: My 93/96 dr350 built from 2 bikes 1st one stolen and barried dug up n trashed but that and e bay parts just need to fab a battery box frame is kick model motor e start so diff batt and do some wiring but rode dirt many years crs/rms/xls had alot of them. was going to put up vid on this but didnt work.but after 10 years of picking up parts here and there.rebuilt starter yesterday got her up and running put up some pics when all done. Edited July 8, 2021 by Crazyredhorse 1 Share this post Link to post Share on other sites
tom2p 2,394 #58 Posted July 8, 2021 On 5/18/2021 at 1:11 AM, Lee1977 said: Home built in 1964. Engine changed in 1968. still grinning ... would be especially great if you had a video of this thing Share this post Link to post Share on other sites
Lee1977 6,666 #59 Posted July 8, 2021 14 hours ago, tom2p said: still grinning ... would be especially great if you had a video of this thing My wife told me to stay off that thing 25 years ago, she is no longer with us, but I haven't been back on it. I'm too old to show what that machine is capable of. I have seen it jump 3 feet off the ground when my friend hit fifth gear cut a flip and come down on the handle bars. He went on up the drive on his hands and knees. 1 Share this post Link to post Share on other sites
tom2p 2,394 #60 Posted July 9, 2021 2 hours ago, Lee1977 said: My wife told me to stay off that thing 25 years ago, she is no longer with us, but I haven't been back on it. I'm too old to show what that machine is capable of. I have seen it jump 3 feet off the ground when my friend hit fifth gear cut a flip and come down on the handle bars. He went on up the drive on his hands and knees. Lee - sorry to hear about your wife she gave you good advice - I can just imagine the bark and bite of that little mini bike Share this post Link to post Share on other sites
tom2p 2,394 #61 Posted July 9, 2021 that Hodaka engine would prob fetch a good buck ... the pipe ... air cleaner assy ... each would prob fetch a good buck Share this post Link to post Share on other sites
Lee1977 6,666 #62 Posted July 9, 2021 44 minutes ago, tom2p said: that Hodaka engine would prob fetch a good buck ... the pipe ... air cleaner assy ... each would prob fetch a good buck I gave $250 for it and the breather new in the box. I guess around $65 for the expenchen chamber, it was after market to increase the HP. There is not a lot of hours on that engine. Sound like a mad swarm of bees in a tin can. At around 55 MPH on a dirt road the rear wheel is and forth trying to decide which side to pass you on. I ran that bike for a couple of years with a stock K91 Kohler and a BorgWarner torque converter it would do 45 MPH. url=https://postimg.cc/bDpZGCDj][/url] Share this post Link to post Share on other sites
Crazyredhorse 295 #63 Posted July 13, 2021 I'd watch Ebay get a frame for it start from there.that chrome tank would cost now though.freind of mine bought one new back then. Share this post Link to post Share on other sites
Pullstart 62,912 #64 Posted July 25, 2021 Check this machine out! I spent a weekend up Nort’ with the boys on a canoe trip and we found this at breakfast this morning. The owner says it’s a ‘62 and there is this one and one other in a museum known to exist. K-181 powered. It looks like the handle on the right is a forward/reverse lever. And how ‘bout those skis!?! Barn roof? Guard rail? @Stepney ever seen one like it? 5 1 Share this post Link to post Share on other sites
1995 520H+96+97 937 #65 Posted July 25, 2021 (edited) http://davidsleds2.mysite.com/PAGE_22111 htmlhttp://davidsleds2.mysite.com/PAGE_25739.html There is a ice auger kit for Right rear a local has one. http://www.vintagesnowmobiles.50megs.com/PP13580.html Edited July 25, 2021 by 1995 520H+96+97 1 Share this post Link to post Share on other sites
tom2p 2,394 #66 Posted July 29, 2021 (edited) not exactly a dirt bike ... maybe sorta / kinda ... mid 90's Gary Fisher Tassajara this bike was buried in the garage for years not long after I got it at a flea market around 20 years ago - then moved it toward the front of the garage where it then sat for a few more years replaced the dry rotted tires and a frayed brake cable and now ready to roll Edited July 29, 2021 by tom2p 2 Share this post Link to post Share on other sites
lynnmor 7,308 #67 Posted July 29, 2021 10 hours ago, tom2p said: mid 90's Gary Fisher Tassajara 21 speed? Share this post Link to post Share on other sites
tom2p 2,394 #68 Posted July 29, 2021 1 hour ago, lynnmor said: 21 speed? yepper - old school 3 x 7 and frame made in the USA - butted chromoly Share this post Link to post Share on other sites