pfrederi 17,742 #1 Posted November 24, 2020 Spot welder is a Miller do not know if it works or for that matter how to work it. Hopefully will be able to find some instructions Bucket is full of stainless steel comprehension fittings. Motor is 1 HP and works. Real item I wanted is the lift cart. No obvious brand but looks well made.... Also a bunch of Acme threading dies for use in an Acme Threading Machine (1-1/2" head??) Some are still sealed in wax. I have no idea what to do with them but they were really cheap. Any one who could use them let me know. 7 8 1 Share this post Link to post Share on other sites
peter lena 8,649 #2 Posted November 24, 2020 PFREDERI, AS A MILLWRIGHT , we did a lot of stainless work repair , had a couple of large vises set up ,one with a spot welder , and another set up with a ridgid tubing bender , for centrifuge oil drive swage lines. the set up made it easy to come in with a problem and leave with the answer. really liked the stainless scrap bins , you could always get a pass on used stainless , we used 316 food grade s/s as well as all of the Hastelloy grades , for anti corrosive areas . pete Share this post Link to post Share on other sites
squonk 41,171 #3 Posted November 24, 2020 Those lift carts are great for picking up the round hoods and non floor board square hoods! Share this post Link to post Share on other sites
tom2p 2,394 #4 Posted November 25, 2020 lift cart appears to be in great shape - and correct color ! Share this post Link to post Share on other sites
DennisThornton 4,769 #5 Posted November 25, 2020 Love the cart now and I'd love the spot welder later if it works! Share this post Link to post Share on other sites
